RICOH THETA (2013 model) | RICOH THETA https://support.theta360.com/en/manual Just another topics.theta360.com site Thu, 20 Jan 2022 10:41:14 +0000 ja hourly 1 https://wordpress.org/?v=6.4.5 Troubleshooting https://support.theta360.com/en/manual/2013/content/troubleshoot/troubleshoot.html Thu, 20 Jan 2022 10:39:25 +0000 https://support.theta360stage.com/en/manual/content//.html If the camera does not work properly or you think there may be a malfunction, check the following support website:

https://support.theta360.com/en/

]]> Installing RICOH THETA for Windows®/Mac https://support.theta360.com/en/manual/2013/content/pc/pc_03.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html The dedicated RICOH THETA for Windows®/Mac software needs to be installed in order to display photos from this camera on your computer.

  1. Access the following website to download RICOH THETA for Windows®/Mac

  2. Follow the instructions on the screen to install RICOH THETA for Windows®/Mac

Note

  • Log in to a user account with administrator privileges to install the software.
]]> Importing Photos to a Computer https://support.theta360.com/en/manual/2013/content/pc/pc_02.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html Transfer photos saved in the internal memory of the camera to your computer.

  1. Connect the camera to your computer using the provided USB cable

  2. Import photos to your computer

    • Windows: Follow the instructions on the screen display.
    • Mac: Use iPhoto or Image Capture.
  3. Remove the USB cable after the transfer is completed

Note

  • The photos saved in the camera can be deleted from a computer.
  • Photos cannot be transferred to the camera from a computer.

Caution

  • Do not turn off the power or remove the USB cable while importing photos.
  • Completely insert the USB cable to connect.
]]> Updating the Camera Firmware from RICOH THETA for Windows®/Mac https://support.theta360.com/en/manual/2013/content/pc/pc_05.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html The camera firmware can be updated from RICOH THETA for Windows®/Mac.

  1. Start RICOH THETA for Windows®/Mac
  2. Select [File] → [Firmware Update] in the menu

  3. Follow the instructions on the screen to connect the camera to your computer using the provided USB cable

  4. Select [To next]

  5. Check Current Version and Available Version and select [To next]

    • The firmware file transfer starts.
  6. When "Transfer Done" is displayed, follow the instructions on the screen to update the firmware on the device

Caution

  • Completely insert the USB cable to connect.
  • Do not disconnect the camera from the computer during the firmware file transfer.
]]> Viewing Photos in RICOH THETA for Windows®/Mac https://support.theta360.com/en/manual/2013/content/pc/pc_04.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html Using RICOH THETA for Windows®/Mac allows you to scroll, zoom in and zoom out while viewing spherical images on your computer.

  1. Start RICOH THETA for Windows®/Mac
  2. Select [File] → [Open] in the menu

  3. Select the photo to be displayed
    • The selected photo is displayed.

    • The display screen can be operated as follows:
      Operations with mouse:
      Drag to scroll within a photo.
      Zoom in or out using the mouse wheel.
      Operations with keyboard:
      Zoom in by pressing PgUp.
      Zoom out by pressing PgDn.
      Scroll by pressing ←↑↓→.
    • A full screen display can be launched by selecting [File] → [Full Screen]. Press Esc to close the full screen display.

Exporting Images

Select [File] → [Write with slant top/bottom correction] → [JPEG data with XMP].

Image slant is corrected, and an image is generated with Photo Sphere XMP added.

Note

  • Images that have Photo Sphere XMP meta data added can be shared and viewed as spherical images on various Google services (Gallery, Google Maps, View, Google+, Photos, etc.).

Closing the Photo

Select [File] → [Close] in the menu.

]]> Posting Photos from RICOH THETA for Windows®/Mac https://support.theta360.com/en/manual/2013/content/pc/pc_06.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html Photos displayed in RICOH THETA for Windows®/Mac can be posted to a social networking service (SNS).

  1. Select [theta360.com] → [Login] in the menu

  2. Enter your account name and password in the login screen and select [Login]

    • When you are logged in successfully, the theta360.com menu item changes from "Login" to "Logout".
  3. Select [theta360.com] → [SNS Share] in the menu

  4. Enter a comment and specify where to share the photo, and then select [Share]

Note

  • A Twitter or Tumblr account is required to share photos on these social networking services.
]]> Recommended Computer Environment https://support.theta360.com/en/manual/2013/content/pc/pc_01.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html Images can be transferred from the camera to a computer using the provided USB cable. Transferred images can be viewed using the basic app for computer.

See below for the recommended computer environment.

https://support.theta360.com/en/enviroment/#PCAPP

Caution

  • The USB function may not work properly if the OS of the computer has been upgraded.
  • Correct operation may not be possible if the OS environment is changed or with certain service pack releases.
  • Connections to USB ports that have been added using an expansion feature (PCI bus, etc.) are not supported.
  • Correct operation may not be possible when used in combination with a USB hub or other USB device.
]]> Selecting a Photo Transfer Method https://support.theta360.com/en/manual/2013/content/settings/settings_02.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html Select whether to keep the photos in the internal memory of the camera when transferring photos saved in the internal memory to a smartphone.

  1. Tap in the app start screen

    • The [Settings] screen is displayed.
  2. Tap [Transfer method]

    • The [Transfer method] settings screen is displayed.
  3. Tap [Copy] or [Move]

    • Select [Copy] to keep the photos in the internal memory after transfer.
    • Select [Move] to delete the photos from the internal memory after transfer.

Caution

  • The size of photos is automatically reduced when the photos are transferred to a smartphone. Select [Copy] if you want to keep the photos in their original size.
]]> Using the Sleep Mode to Save Power https://support.theta360.com/en/manual/2013/content/settings/settings_03.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html Save battery power by enabling the sleep mode when the camera is not operated for a set period of time.

  1. Tap in the app start screen

    • The [Settings] screen is displayed.
  2. Tap [Sleep Mode]

    • The [Sleep Mode] settings screen is displayed.
  3. Select a time.

    • Select [Off] to disable the sleep mode.

Automatically Turning Off the Camera Power When the Camera is Not in Use

If no operations are performed for a further 5 minutes after the camera enters the sleep mode, the power turns off (for example, if 3 minutes are set, the power turns off after 8 minutes).

]]> Checking and Changing the Camera Settings https://support.theta360.com/en/manual/2013/content/settings/settings_01.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html Check the status of the camera and configure various settings in the [Settings] screen.

  1. Tap in the app start screen

    • The [Settings] screen is displayed.

Settings

The following settings are displayed in the [Settings] screen.

Wi-Fi Status:
Check the Wi-Fi status of the smartphone.
Login/Logout:
Log in to and out of theta360.com.
Connection:
Check the connection between the camera and the smartphone.
Transfer method:
Select whether to keep the photos on the camera when transferring photos from the camera to the smartphone. (Selecting a Photo Transfer Method)
Sleep Mode:
Set the length of time before the camera enters the sleep mode (Off/3 minutes/5 minutes/7 minutes).
If no operations are performed for a further 5 minutes after the camera enters the sleep mode, the power turns off.
Camera version:
Check the firmware version of the camera.
App version:
Check the version of the app.
Twitter:
Set a Twitter account.
Tumblr:
Set a Tumblr account.
]]> Checking the Package https://support.theta360.com/en/manual/2013/content/prepare/prepare_01.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html When opening the package, check that the following items are included:

  • RICOH THETA

  • USB cable

  • Soft case

  • Quick Start Guide

  • Important Message to Customers

]]> Connecting the Camera to a Smartphone https://support.theta360.com/en/manual/2013/content/prepare/prepare_06.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html When the camera is connected to a smartphone via a Wi-Fi network, you can use your smartphone to shoot remote photos and view photos.

  1. Press the power button on the camera to turn the power on

  2. Press the wireless button to turn the wireless function on

    • The wireless lamp lights in red.
  3. Display the Wi-Fi settings of your smartphone
  4. Select the SSID of the camera from the network list and enter the password

    • The serial number printed on the base of the camera is the same as the SSID and password.
      The SSID is "THETA" plus the numbers in the (B) section (in this case "THETA001017"). The password is the numbers in the (A) section (in this case "00001017").
    • When the dedicated app is started after the connection is done, the wireless lamp lights in blue.

Wireless Lamp

The status of the wireless lamp shows the Wi-Fi status of the camera.

Lit in blue:
The Wi-Fi function is on and communication with a smartphone via a Wi-Fi connection is in progress
Lit in red:
Wi-Fi function on
Unlit:
Wi-Fi function off

Date and Time Settings

The date and time of the camera are synchronized with the smartphone when connected.

]]> Downloading the App https://support.theta360.com/en/manual/2013/content/prepare/prepare_05.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html This camera takes great photos. You can also use a smartphone app for all controls including shooting, viewing and sharing from your smartphone.

  1. Access the app download service that is compatible with your smartphone

    • Certain functions within the iOS application and the Android application are different.
  2. Search for RICOH THETA

    • When downloading the Android application, search for “RICOH THETA m15”.
  3. Follow the instructions on the screen to download

    • An icon () is displayed on the home screen when the download is done.
]]> Turning the Power On/Off https://support.theta360.com/en/manual/2013/content/prepare/prepare_04.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html When charging of the internal battery is done, turn on the power.

  1. Press the power button

    • The power turns on and the power lamp is lit in blue.
    • Press the power button again to turn the power off.

Power Lamp

When the power is on, the status of the power lamp shows the battery capacity.

Lit in blue:
There is sufficient battery capacity.
Flashing in blue:
The battery capacity is low.
Unlit:
The battery has run out.
]]> Charging https://support.theta360.com/en/manual/2013/content/prepare/prepare_03.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html The internal battery needs to be charged before use.

  1. Connect the camera to your computer using the provided USB cable

    • The power lamp is lit in red when charging starts.
    • The power lamp is unlit when charging is done.
  2. Remove the USB cable after charging is done

Caution

  • If the power lamp flashes in red, remove the USB cable and stop charging.
  • Use the provided USB cable for charging.
  • Connect directly to a USB port on your computer. Do not connect via a USB hub. It may not be possible to charge via some USB hubs.
  • When charging, be sure to insert and remove the USB cable while the computer is turned on. If the computer is restarted while the USB cable is inserted, the computer may not recognize the camera.

Charging Time

The camera is charged in approximately 180 minutes (at 25°C).

Note

  • The time above is a guide for full charging. The charging time differs according to the remaining battery capacity.
  • If the battery capacity is low, it may take a while for the camera to be recognized by the computer.
]]> Names of Camera Parts https://support.theta360.com/en/manual/2013/content/prepare/prepare_02.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html This section explains the names and functions of the buttons, lamps, etc. on the camera.

  1. Lens

    Caution

    • Be careful when handling the lens section.

  2. Status lamp

    Displays the processing status of the camera. (Details)

    Lit in blue:
    Photo can be taken
    Flashing in blue(slow):
    Sleep mode (power saving)
    Flashing in blue (fast):
    Internal processing in progress
    Lit in red:
    Electromagnetic compass error
    Flashing in red:
    Updating firmware
    Unlit (when the power is on):
    The number of photos that can be taken is zero

  3. Shutter button

    Press to take photos.

  4. Power lamp

    Displays the power status.

  5. Power button

    Turns the power on/off.

  6. Wireless button

    Turns the wireless function on/off.

  7. Wireless lamp

    Displays the wireless status.

  8. USB terminal

    Connect to your computer using the provided USB cable.

  9. Reset button

    The password is initialized.

    Caution

    • Do not press the reset button while data is being recorded after shooting. Shooting may no longer be possible after doing this.

  10. Tripod mount hole

    Caution

    • When using the tripod, take care not to overtighten the screws.

]]> Specifications https://support.theta360.com/en/manual/2013/content/add_info/add_info_01.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html
Shooting distance:
Approximately 10cm to infinity (from front of lens)
Exposure control:
Automatic
Exposure compensation:
Manual (-2.0 to +2.0EV, 1/3EV step)
ISO sensitivity:
Automatic, ISO100-1600
White balance:
Automatic
Shutter speed:
Automatic, 1/8000 – 1/7.5 seconds
Memory:
Internal, approximately 4GB
Storage capacity:
Approximately 1,200 images (subject to shooting conditions)
Power:
Internal lithium ion battery, rechargeable via USB cable
Battery life:
200 captures per full charge (with Wi-Fi® on, transmitting images at 30-second intervals; duration varies with usage conditions)
Image file format:
JPEG (Exif ver.2.3), DCF2.0-compliant
External interface:
Micro-USB: USB 2.0
Dimensions (L x W x D):
42 mm (approx.1.65 inches) x 129 mm (approx. 5.08 inches) x 22.8 mm (approx. 0.9 inches)
Depth 17.4 mm (approx. 0.69 inches) without lenses
Weight:
Approx. 95 grams (approx. 3.35 ounces)
Operating temperatures:
0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit)
Operating humidity:
Under 90%
Storage temperatures:
-20 to 60 degrees Celsius (-4 to 140 degrees Fahrenheit)
]]> Care and Storage https://support.theta360.com/en/manual/2013/content/add_info/add_info_04.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html

Care

  • Please note that if fingerprints, dirt, etc. get onto the lens, picture quality will suffer.
  • When dust or dirt does get on the lens, do not touch it directly with your fingers, and either use a blower (available in stores) to blow it off, or a soft cloth to gently dust it off.
  • After use at the beach or around chemicals, wipe it off particularly carefully.
  • In the unlikely event that your camera fails to work properly, please consult the nearest service center.
  • Never disassemble the camera by yourself, as this is dangerous.
  • Do not get volatile substances, such as thinner, benzene, or pesticides on your camera. This may cause a change in quality, paint to peel, etc.

Use and Storage

  • Please avoid using or storing your camera in the following kinds of places, as this may damage the camera.
    Places with high temperature, high humidity, or rapid changes in humidity or temperature
    Places with large amounts of sand or dust
    Places with significant vibration
    Places where it will be in contact with chemicals such as insect repellent or products made from rubber, vinyl, etc. for long periods of time
    Places where strong magnetism is emitted (next to monitors, transformers, magnets, etc.)
  • Store your camera in a dust-free camera bag, etc. to prevent dust or dirt from getting on the camera. Also, avoid carrying the camera without a case (in your pocket, etc.) to help to keep free from dust or fiber particles.

Precautions regarding care of your camera

  • Be sure to turn the power off.
]]> Safety Precautions https://support.theta360.com/en/manual/2013/content/add_info/add_info_05.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html Warning Symbols

Various symbols are used throughout this instruction manual and on the product to prevent physical harm to you or other people and damage to property. The symbols and their meanings are explained below.

　Danger

  • This symbol indicates matters that may lead to imminent risk of death or serious injury if ignored or incorrectly handled.

　Warning

  • This symbol indicates matters that may lead to death or serious injury if ignored or incorrectly handled.

　Caution

  • This symbol indicates matters that may lead to injury or physical damage if ignored or incorrectly handled.

Sample Warnings

  •  The symbol alerts you to actions that must be performed.

  •  The symbol alerts you to prohibited actions.
     The symbol may be combined with other symbols to indicate that a specific action is prohibited.
  • Examples
     Do not touch
     Do not disassemble

Observe the following precautions to ensure safe use of this equipment.

　Danger

  • Do not attempt to disassemble, repair or alter the equipment yourself. The high-voltage circuitry in the equipment poses significant electrical hazard.

  • Stop use immediately if you notice something unusual such as an abnormal smell, smoke, or overheating. Please ask your nearest dealer or service center for repair.

　Warning

  • Turn off the power immediately if any metallic object, water, liquid or other foreign object gets into the camera. And contact the nearest service center. Do not continue using the machine if it has a failure or malfunction.

  • Keep the equipment out of the reach of children. Young children cannot understand the information in Safety Precautions and Cautions on Use, which may cause an accident.

  • Do not touch the internal components of the equipment if they become exposed as a result of being dropped or damaged. The high-voltage circuitry in the equipment could lead to an electric shock. Contact your nearest dealer or service center if it is damaged.

  • Do not use the equipment near flammable gases, gasoline, benzene, thinner or similar substances to avoid the risk of explosion, fire or burns.
  • Do not use the equipment in locations such as airplanes where usage is restricted or prohibited as this may lead to disasters or accidents.

  • Stop charging if the charging does not complete within the specified charging time.
  • Never put the battery in a microwave oven or high-pressure container.

　Caution

  • Contact with fluid leaking from the battery in the camera can lead to burns. If you touch the fluid, rinse the area with water immediately. (Do not use soap.) And contact the nearest service center. Do not continue using the machine if it has a failure or malfunction.

  • Do not get the camera wet. In addition, do not operate it with wet hands. Both pose the risk of electric shock.
  • Do not use it wrapped in a cloth, etc. Doing so may cause a fire.
  • Do not allow the metal of the terminals to short circuit. Doing so may cause a fire.
  • Do not use it in wet places like kitchens where it will be exposed to oily smoke and humidity. Doing so may cause a fire or electric shock.
]]> Separately Sold Products https://support.theta360.com/en/manual/2013/content/add_info/add_info_02.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html

  • Attachment for Strap (AT-1)

    Use to attach a strap to the RICOH THETA.

    • ]]>         Cautions on Use https://support.theta360.com/en/manual/2013/content/add_info/add_info_03.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html

    Camera

    • This product was manufactured for use in the country in which it was purchased. The warranty is only valid in the country in which the camera was purchased.
    • Should the product fail or malfunction while you are abroad, the manufacturer assumes no responsibility for servicing the product locally or bearing the expenditure incurred therefore.
    • Be sure not to drop or apply any sudden force to the camera.
    • While you are carrying the camera, be careful not to hit it against other objects. Take special care not to hit the lens.
    • In an environment where the temperature changes suddenly, condensation may occur in the camera, resulting in troubles such as fogging of the glass surface or malfunctions of the camera. If this occurs, place the camera in a bag to slow the temperature change as much as possible. Take it out of the bag after the temperature difference from the atmosphere has decreased to a fairly small amount. If condensation occurs, wait until the moisture has dried before using the camera.
    • Do not get the camera wet. Do not operate the camera with wet hands. This can result in malfunction or an electrical shock.
    • When taking photos of an important event (such as a wedding or overseas trip), take a test photo beforehand to check that the camera is working properly.

    Battery

    • The battery is a lithium ion battery.
    • Be sure to charge the battery before use, as it is not fully charged at the time of dispatch.
    • Due to the characteristics of the battery, use in cold areas will shorten the usage time even if the battery is sufficiently charged.
    • If storing for a long time, charge the battery for around 30 minutes once a year.
    • Store in a cool place. A dry place with an ambient temperature of 15°C – 25°C is recommended. Avoid extremely hot or cold places.
    • Do not recharge immediately after charging is done.
    • Charge in an area with an ambient temperature of 10°C – 40°C. Charging in a hot area may cause the battery to deteriorate. Charging in a cold area may prevent sufficient charging.
    ]]>         Taking Photos while Connected to a Smartphone https://support.theta360.com/en/manual/2013/content/shooting/shooting_02.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html When the connection settings between the camera and a smartphone are done, photos can be taken using the smartphone application. (Connecting the Camera to a Smartphone)

    1. Press the power button on the camera to turn the power on

    2. Press the wireless button to turn the wireless function on

      • The wireless lamp lights in red.
      • This does not need to be done if the wireless lamp lights in red when the power is turned on.
    3. Select the SSID of the camera in the Wi-Fi settings of the smartphone
    4. Start the smartphone application

      • The wireless lamp lights in blue.
    5. Tap to display the shooting screen

    6. Tap to take a photo

      • Tap (A) to change the transfer mode.
        Postview: Photos are transferred to the smartphone at the same time as being saved in the camera’s built-in memory.
        No Postview: Photos are not transferred to the smartphone.
      • (B) is a guide to the remaining number of photos that can be taken.
      • Exposure compensation can be done using the slider at the center of the screen (C). Move it to the right to brighten the photo or to the left to darken the photo.

    Note

    • If a photo is taken while connected to a smartphone with a GPS function enabled, position information is recorded for the photo.
    • If [Transfer method] is set to [Move], photos are deleted from the internal memory of the camera after being transferred to the smartphone.
    • Photos can also be taken using the shutter button of the camera. However, these photos are not transferred to the smartphone.
    • The exposure compensation settings return to the default when the power is turned off.

    Caution

    • If the Wi-Fi connection fails, check the Wi-Fi settings of the smartphone.
    ]]>         Adjusting the Photo Brightness when Taking Photos https://support.theta360.com/en/manual/2013/content/shooting/shooting_03.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html Brighten or darken photos to suit the purpose of the photos.
    If you check a photo and feel that it is too bright or too dark, adjust the brightness and retake the photo to obtain the desired brightness.

    1. Tap in the app start screen

      • The shooting screen is displayed.
    2. Move the slider at the center of the screen to the left or right

      • Move it to the right to brighten the photo or to the left to darken the photo.

    Note

    • The exposure compensation settings return to the default when the power is turned off.
    ]]>         Checking the Number of Photos that Can Be Taken https://support.theta360.com/en/manual/2013/content/shooting/shooting_04.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html Check the number of photos that can be recorded to the internal memory.

    1. Tap in the app start screen

      • The [Settings] screen is displayed.
    2. Check [Remaining Space]

    ]]>         Taking Photos Using Only the Camera https://support.theta360.com/en/manual/2013/content/shooting/shooting_01.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html This section explains basic methods for taking photos.

    1. Turn on the power of the camera

    2. Position the camera

      • Position the camera as upright as possible.
    3. Press the shutter button

      • The photo that is taken is saved in the internal memory of the camera.

    Note

    Caution

    • An accurate date and time are not recorded if photos are taken when the camera has never been connected to a smartphone.
    • Orientation information may not be recorded if the camera is tilted when taking photos.

    Camera Status Lamp

    Some lighting statuses of the camera status lamp show that it is not possible to take photos. Refer to the following and check the status of the camera.

    Lit in blue:
    Photos can be taken.
    Flashing in blue(slow):
    Sleep mode (power saving).
    Flashing in blue (fast):
    Photos cannot be taken because internal processing is in progress.
    Lit in red:
    An error is occurring in the electromagnetic compass.
    Flashing in red:
    The firmware of the camera is being updated.
    Unlit:
    No more photos can be taken.

    Note

    • The camera automatically enters the sleep mode if no operations are performed for a set period of time (default setting 5 minutes). Photos cannot be taken in the sleep mode. Press the shutter button to enable shooting and then press the shutter button again to take a photo.
    • During sleep mode, the wireless function is turned off and cannot be turned on by pressing the wireless button.
    • If the lamp is lit in red, the electromagnetic compass needs to be calibrated. Move the camera in a figure eight until the lamp turns blue.
    • Orientation information may not be recorded if a magnet or other magnetic item is placed near the camera. In such cases, it is recommended that you calibrate the electromagnetic compass by moving the camera in a figure eight before taking photos.
    • If no more photos can be taken, delete photos from the camera.
    ]]>         Viewing Photos You Have Taken https://support.theta360.com/en/manual/2013/content/view_share/view_share_01.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html The smartphone app can be used to view photos saved in the camera or transferred to a smartphone. A connection needs to be set between the camera and a smartphone to view the photos saved in the camera. (Connecting the Camera to a Smartphone)

    1. Press the power button on the camera to turn the power on

    2. Press the wireless button to turn the wireless function on

      • The wireless lamp lights in red.
      • This does not need to be done if the wireless lamp lights in red when the power is turned on.
    3. Select the SSID of the camera in the Wi-Fi settings of the smartphone
    4. Start the smartphone application

      • The wireless lamp lights in blue.
    5. Select where photos are saved

      • [App]: A list of photos transferred to the smartphone is displayed.
      • [Camera Roll]: A list of photos saved in the photo app of the smartphone is displayed. Spherical images selected from the list can be displayed in the viewer. For details on how to save to the [Camera Roll], see “Viewer” below.
      • [Camera]: A list of photos saved in the internal memory of the camera is displayed.
    6. Tap the photo to be viewed

      • The selected photo is displayed in the Viewer.
      • (A) can be used to select a photo to be displayed.

    Note

    • When a photo is selected from [Camera] and displayed in the Viewer, the photo is transferred from the internal memory of the camera to the smartphone.
    • When a photo is saved to the [Camera Roll], the spherical image can be sent by e-mail.

    Viewer

    Display a desired area of a spherical image taken with the camera, and zoom in or out to check details in the photo.

    • Zooming in or out of a photo: Pinch out, pinch in

    • Changing the displayed area (moving the photo): Swipe or flick

    Tap the screen when an image is displayed in the viewer to display the buttons and perform various operations.

    (A):
    Returns to the image list.
    (B):
    Uploads images to SNS such as Facebook, etc.
    (C):
    Displays the previous image.
    (D):
    Displays the next image.
    (E):
    Saves images to the [Camera Roll] (smartphone photo app). When an image is saved, the image slant is corrected and Photo Sphere XMP meta data is added.
    (F):
    Deletes photos.

    Note

    • Images that have Photo Sphere XMP meta data added can be shared and viewed as spherical images on various Google services (Gallery, Google Maps, View, Google+, Photos, etc.).
    ]]>         Transferring Photos Saved in the Camera to a Smartphone https://support.theta360.com/en/manual/2013/content/view_share/view_share_03.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html Photos saved in the internal memory, such as photos taken using only the camera, can be transferred to a smartphone. A connection needs to be set between the camera and a smartphone to transfer photos from the camera. (Connecting the Camera to a Smartphone)

    1. Press the power button on the camera to turn the power on

    2. Press the wireless button to turn the wireless function on

      • The wireless lamp lights in red.
      • This does not need to be done if the wireless lamp lights in red when the power is turned on.
    3. Select the SSID of the camera in the Wi-Fi settings of the smartphone
    4. Start the smartphone application

      • The wireless lamp lights in blue.
    5. Select [Camera]

      • A list of photos saved in the internal memory of the camera is displayed.
    6. Tap .

      • The screen switches to the album editing screen.
    7. Select the photo(s) to be transferred

      • Multiple photos can be selected. A check mark appears for selected photos.
      • Tap (Select All button) to select all photos. Tap (Cancel button) to cancel all selections.
    8. Tap [Transfer]

      • The transfer starts and the progress is displayed on the screen.
      • To cancel the transfer, tap x and tap [Cancel transfer].

    Caution

    • The size of photos is automatically reduced when the photos are transferred to a smartphone.

    Note

    ]]>         Deleting Photos https://support.theta360.com/en/manual/2013/content/view_share/view_share_02.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html Photos that have been saved in the camera or transferred to a smartphone can be deleted. A connection needs to be set between the camera and smartphone to delete the photos saved in the camera. (Connecting the Camera to a Smartphone)

    1. Press the power button on the camera to turn the power on

    2. Press the wireless button to turn the wireless function on

      • The wireless lamp lights in red.
      • This does not need to be done if the wireless lamp lights in red when the power is turned on.
    3. Select the SSID of the camera in the Wi-Fi settings of the smartphone
    4. Start the smartphone application

      • The wireless lamp lights in blue.
    5. Select [App] or [Camera]

      • [App]: Photos transferred to the smartphone can be deleted.
      • [Camera]: Photos saved in the internal memory of the camera can be deleted.
    6. Tap .

      • The screen switches to the album editing screen.
    7. Select the photo(s) to be deleted

      • Multiple photos can be selected. A check mark appears for selected photos.
      • Tap (Select All button) to select all photos. Tap (Cancel button) to cancel all selections.
    8. Tap [Delete]

      • A confirmation screen is displayed. Tap [Yes] to start deletion.

    Caution

    • Photos saved in the camera and photos transferred to smartphones are a different size. The size of photos is automatically reduced when the photos are transferred to a smartphone. If you want to keep the photos in their original size, save them to a computer before deleting them.
    ]]>         Uploading Photos to a Social Networking Service https://support.theta360.com/en/manual/2013/content/view_share/view_share_04.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html Photos you have taken can be directly uploaded to social networking services such as Twitter and Facebook from the app. A connection needs to be set between the camera and smartphone to upload the photos saved in the camera. (Connecting the Camera to a Smartphone)

    1. Press the power button on the camera to turn the power on

    2. Press the wireless button to turn the wireless function on

      • The wireless lamp lights in red.
      • This does not need to be done if the wireless lamp lights in red when the power is turned on.
    3. Select the SSID of the camera in the Wi-Fi settings of the smartphone
    4. Start the smartphone application

      • The wireless lamp lights in blue.
    5. Select [App] or [Camera]

      • [App]: Photos transferred to the smartphone can be shared.
      • [Camera]: Photos saved in the internal memory of the camera can be shared.
    6. Tap the photo to be posted

      • The selected photo is displayed in the Viewer.
    7. Tap the screen to display the buttons, and then tap [Share].

      • The posting screen is displayed.
    8. Enter the text to be posted

      • The posting screen is displayed.
    9. Select the social networking service to post to

    10. Tap [Done]

      • If you have not registered your social networking service account, a settings screen is displayed. The photo is uploaded after the settings are done.

    Caution

    • A 3G or LTE line is used for sharing in step 10 even if the camera is connected to a smartphone via Wi-Fi. This operation therefore needs to be performed in a place where this communication is possible. If sharing via Wi-Fi, change the Wi-Fi connection to a public wireless LAN access point.
    • When using the Android application to connect your smartphone to the camera using Wi-Fi, you need to switch network connections in order to post photos. Therefore, when you want to use the camera by connecting it to the smartphone after posting your photos, you need to reconnect them.

    Note

    • The photo is uploaded to theta360.com, the dedicated display site, and a link to the uploaded photo is posted to the social networking service.
    ]]>