RICOH THETA V | RICOH THETA https://support.theta360.com/en/manual Just another topics.theta360.com site Wed, 26 Jul 2023 00:07:19 +0000 ja hourly 1 https://wordpress.org/?v=6.4.5 Troubleshooting https://support.theta360.com/en/manual/v/content/troubleshoot/troubleshoot.html Thu, 20 Jan 2022 10:39:25 +0000 https://support.theta360stage.com/en/manual/content//.html If the camera does not work properly or you think there may be a malfunction, check the following support website:

https://support.theta360.com/en/

]]> Connecting to a Smartphone via Wireless LAN https://support.theta360.com/en/manual/v/content/prepare/prepare_06.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html When the camera is connected to a smartphone via a wireless LAN, you can use the smartphone to capture images remotely, view images, and make function settings.

  1. Turn on the power of the camera.

  2. Press the wireless button to turn the wireless LAN function on.

    • The wireless lamp flashes.
  3. Display the Wi-FiTM settings of the smartphone.
  4. Select the SSID of the camera from the network list and enter the password.

    • The serial number printed at the bottom of the camera is the same as the SSID and password.
      The SSID is “THETA + Serial number indicated by (B) + .OSC” (in this case “THETAYL00001017.OSC”). The password is the numbers indicated by (A) (in this case “00001017”).
    • The password can be changed from the smartphone.
    • The password is initialized by pressing and holding the wireless button while the power is on. The power turns off automatically at this time.
    • When the wireless LAN connection is complete, the wireless lamp lights.

Wireless Lamp

The wireless lamp indicates the wireless LAN connection status of the camera.

Lit:
The wireless LAN function is on. (The camera is connected to a wireless LAN.)
Flashing:
The wireless LAN function is on. (The camera is not connected to a wireless LAN.)
Unlit:
The wireless LAN function is off.

Date and Time Settings

The date and time of the camera are synchronized with the smartphone when the camera is connected to the smartphone and the basic app is started.

]]> Downloading the App https://support.theta360.com/en/manual/v/content/prepare/prepare_05.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html This camera captures great images. You can also use a smartphone app for shooting, viewing, and sharing images from your smartphone.

The following apps for smartphone are available for this camera.

Basic app:
RICOH THETA (iOS app and Android app)
Editing app:
RICOH THETA+ (iOS app and Android app)
  1. Access the app download service that is compatible with your smartphone.
  2. Search for “RICOH THETA”.
  3. Follow the instructions on the screen to download the app.
    • An icon () is displayed on the home screen when the download is complete.

Note

  • The apps for computer are also available. See below for details on each app and the latest information about apps.
    https://theta360.com/en/about/application/
  • There are some differences between functions provided by the “RICOH THETA for iPhone” (iOS app) and “RICOH THETA for Android” (Android app). The screens of “RICOH THETA for iPhone” (iOS app) are used as examples in this user guide.
]]> Connecting the Camera to the Remote Control TR-1 https://support.theta360.com/en/manual/v/content/prepare/prepare_09.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html You can use the Bluetooth® function to connect the camera to the Remote Control TR-1 (sold separately).
Set the camera in advance so that the plug-in “REMOTE CONTROL” can be run.

  1. Turn on the power of the camera.

  2. Press and hold the mode button.

    • The camera status lamp flashes white.
  3. Press and hold the shutter button on the Remote Control TR-1 to set it to the pairing state or connection standby state.
    • When the camera is connected to the Remote Control TR-1, the camera status lamp lights white.

Note

  • After running the plug-in “REMOTE CONTROL”, the response speed of the wireless LAN slows down until the connection between the camera and the Remote Control TR-1 is established.

Disconnecting the Remote Control TR-1 from the Camera

  1. Press and hold the mode button.

    • The camera status lamp turns off, and the Remote Control TR-1 is disconnected from the camera.

Resetting the Connection Information

When you want to connect another device to the camera or when the Remote Control TR-1 cannot be connected correctly, press and hold the wireless button to reset the connection information.

Caution

  • If you reset the connection information, the wireless LAN password is also reset.
]]> Connecting to a Smartphone Using a Wireless Router https://support.theta360.com/en/manual/v/content/prepare/prepare_08.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html When the camera is connected to a wireless router in the wireless LAN client mode, you can use a smartphone via the wireless router to capture images remotely, view images, and make function settings.
Connect the camera directly to a smartphone via a wireless LAN, and then use the smartphone to make settings to connect the camera to a wireless router.

  1. Turn on the power of the camera.

  2. Press the wireless button to turn the wireless LAN function on.

    • The wireless lamp flashes.
  3. Display the Wi-FiTM settings of the smartphone.
  4. Select the SSID of the camera from the network list and enter the password.

    • The serial number printed at the bottom of the camera is the same as the SSID and password.
      The SSID is “THETA + Serial number indicated by (B) + .OSC” (in this case “THETAYL00001017.OSC”). The password is the numbers indicated by (A) (in this case “00001017”).
    • The password can be changed from the smartphone.
    • The password is initialized by pressing and holding the wireless button while the power is on. The power turns off automatically at this time.
    • When the wireless LAN connection is complete, the wireless lamp lights blue.
  5. Start the basic app for smartphone, and then tap [Settings].
    • The [Settings] screen is displayed.
  6. Tap [Wireless LAN client mode], and then tap [Access point settings].
  7. Tap [Add access point], and then enter the name, security type, and password of the wireless router.
  8. Tap [Done].
    • The display returns to the [Wireless LAN client mode] screen.
    • At this point, the wireless button operation changes from switching between “Off” and “On” into switching among “Off”, “Direct mode” (direct connection to a smartphone), and “Client mode”.
  9. Tap [Authentication settings].
  10. Enter the password.
  11. Tap [Specify a password].
  12. Press the wireless button of the camera.
    • The camera enters the client mode, and the wireless lamp lights or flashes green.
    • In the client mode, the camera searches for the wireless router and establish a connection with it. When the camera cannot establish a connection with the wireless router, the camera enters the direct mode.
  13. Connect the smartphone to the wireless router.
  14. Tap the [Shooting] tab or [Cam images] tab.
    • When multiple cameras are available for connection, a list of cameras is displayed. Tap the name of the camera to connect to.
  15. Enter the password.
    • The serial number printed at the bottom of the camera ((A) in Step 4) is the default password.

Wireless Lamp

The wireless lamp indicates the wireless LAN connection status of the camera.

Lit in green:
The wireless LAN function is on. (The camera is connected in the client mode.)
Flashing in green:
The wireless LAN function is on. (The camera is not connected in the client mode.)
Unlit:
The wireless LAN function is off.

Date and Time Settings

The date and time of the camera are synchronized with the smartphone when the camera is connected to the smartphone and the basic app is started.

]]> Turning the Power On/Off https://support.theta360.com/en/manual/v/content/prepare/prepare_04.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html When charging of the built-in battery is complete, turn on the power.

  1. Press and hold the power button.

    • The lamp of the selected capture mode lights.
    • Press the power button to put the camera to sleep. Press and hold the power button again to turn off the power.

Power Lamp

The lamp indicates the camera status when the power is on.

Lit in blue:
There is a sufficient battery level.
Flashing in blue:
The battery level is low.
Flashing in red:
The power is turning off.
Unlit:
Charging is complete, the camera is sleeping, or the power is off.

Note

  • When the camera is connected via a USB cable, the lamp lights green and the battery is charged. The lamp is unlit when charging is complete.
]]> Charging https://support.theta360.com/en/manual/v/content/prepare/prepare_03.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html The built-in battery needs to be charged before use.

  1. Connect the camera to the computer using the provided USB cable.

    • The power lamp lights green when charging starts. (The lamp flashes in green when the remaining battery level is low.)
    • The power lamp is unlit when charging is complete.
  2. Remove the USB cable after charging is complete.

Caution

  • If the power lamp flashes in red, remove the USB cable and stop charging.
  • Use the provided USB cable for charging. It may take time for the battery to charge or the battery may not charge at all when a USB cable other than the provided USB cable is used.
  • Connect the cable directly to a USB port on the computer. Do not connect the cable via a USB hub. It may not be possible to charge via some USB hubs.
  • When charging, be sure to insert and remove the USB cable while the computer is turned on. If the computer is restarted while the USB cable is inserted, the computer may not recognize the camera.

Charging Time

The camera is charged in approx. 200 minutes (at 25°C (77°F)).

Note

  • The time described above is a guide for full charging. The charging time differs according to the remaining battery level.
  • If the remaining battery level is low, it may take time for the camera to be recognized by the computer.
]]> Names of Camera Parts https://support.theta360.com/en/manual/v/content/prepare/prepare_02.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html This section explains the names and functions of the buttons, lamps, etc. on the camera.

  1. Microphone

    Four microphones are incorporated in the camera.

  2. Lens

    Caution

    • Be careful when handling the lens section to avoid damage.

  3. Camera status lamp

    Indicates the camera status.

    Lit in blue:
    The camera can be used.
    Flashing in blue:
    The camera is starting up (when the lamp flashes slowly).
    File conversion is progressing (when the lamp flashes rapidly).
    Lit in white:
    The plug-in installed in the camera is running.
    Flashing in red:
    An error has occurred in the camera.

    Lit in green:
    The self-timer can be used for shooting.
    Unlit:
    Shooting is not possible as the camera is in the sleep mode, no more images can be captured, or no more recordable time remains. The lamp is also unlit during shooting.

  4. Shutter button

    Press to capture images.

  5. Speaker

  6. Wireless lamp

    Indicates the wireless LAN connection status.

    Lit:
    The wireless LAN function is on. (The camera is connected to a wireless LAN.)
    Flashing:
    The wireless LAN function is on. (The camera is not connected to a wireless LAN.)
    Unlit:
    The wireless LAN function is off.

  7. Capture mode lamp

    The lamp that corresponds to the selected capture mode lights.
    Shooting is not possible while the lamp is flashing because internal processing is in progress.
    Still image icon and Video icon flash during the firmware update.

  8. Video recording lamp

    Flashes while capturing video.

  9. Memory warning lamp

    Indicates the remaining number of images that can be captured.

    Unlit:
    Remaining number of images that can be captured: 1300 or more (Remaining memory: 5 GB or more)
    Lit:
    Remaining number of images that can be captured: 500 or more but less than 1300 (Remaining memory: 2 GB or more but less than 5 GB)
    Flashing:
    Remaining number of images that can be captured: Less than 500 (Remaining memory: Less than 2 GB)

  10. Power lamp

    Indicates the power status. (Details)

  11. Power button

    Turns the power on/off when the button is pressed and held.
    Puts the camera to sleep when the button is pressed.

  12. Wireless button

    Turns the wireless LAN function on/off. (Details)

  13. Mode button

    Switches among the still image capture mode, video mode, and live streaming mode. (Switching to the live streaming mode is possible only when the USB cable is connected.)
    Runs the plug-in installed in the camera when the button is pressed and held. (Details)

  14. Microphone terminal

    Connects the 3D microphone TA-1 (sold separately). (Details)

    Caution

    • Do not connect any device other than the 3D microphone TA-1 to the microphone terminal.

  15. USB terminal

    Connects the provided USB cable to connect the camera to a computer. (Details)

    Caution

    • It may take time for the battery to charge or the battery may not charge at all when a USB cable other than the provided USB cable is used.

  16. Tripod mount hole

    Caution

    • When using the tripod, take care not to overtighten the screw.

]]> Shooting Still Images while Connected to a Smartphone with the Self-timer Function https://support.theta360.com/en/manual/v/content/shooting-photo/shooting_photo_04.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html You can capture still images using the self-timer function with the basic app for smartphone.

  1. While pressing the wireless button, press the power button on the camera to turn the power on.

    • The camera status lamp lights green.
  2. Place the camera.
  3. Connect the camera to a smartphone via a wireless LAN or Bluetooth®.
  4. Start the basic app for smartphone.
  5. Tap to start the self-timer.
    • Tapping EV at the bottom of the screen displays the slider for correcting the exposure. If you check a still image and feel that it is too bright or too dark, adjust the brightness and capture the image to obtain the desired brightness. Moving the slider to the right brightens the image. Moving the slider to the left darkens the image.
    • You can make settings such as shutter speed, ISO sensitivity, white balance, shooting method, live view, and post-view on/off to suit the purpose of your shooting.
    • Countdown starts and shooting is performed 5 seconds later.

Caution

  • If the shutter speed is set slower than 1/8 seconds in the manual mode, a sound is heard both at the start and end of shooting. If images are captured with the noise reduction set in the auto mode, a sound is heard both at the start and end of shooting. At this time, images are not saved if the power is turned off before shooting is complete.
  • When shooting in the auto mode with the noise reduction or HDR rendering set, fix the camera in place using a tripod to prevent the camera from moving.
  • The capture mode is limited to the still image capture mode. (The self-timer cannot be used for the video mode.)

Note

  • If an image is captured while the camera is connected to a smartphone with the GPS function enabled, position information is recorded for the image.
  • If [Transfer method] is set to [Move], still images are deleted from the internal memory of the camera after they are transferred to the smartphone.
  • Still images can also be captured using the shutter button of the camera. However, these still images are not transferred to the smartphone.
  • If the shutter speed is set slower than 1/8 seconds in the manual mode, all lamps turn off. If images are captured with the noise reduction set in the auto mode, all lamps may turn off.
  • The default countdown time is 5 seconds.
  • If the shutter button is pressed during countdown, shooting can be performed immediately.
    (The self-timer is canceled.)
  • To cancel the self-timer, press the mode button.
    (If the remaining countdown time is less than 2 seconds, the self-timer cannot be canceled.)
  • The countdown sound volume is proportional to the shutter sound volume.
    (When the shutter sound is off, the countdown sound is off either.)
  • The settings below can be made for the basic app for smartphone.
  • Changed countdown time is kept even if the camera power is turned off.
  • To cancel the self-timer, set [Shooting method] to [Normal shooting].
]]> Shooting Still Images while Connected to a Smartphone https://support.theta360.com/en/manual/v/content/shooting-photo/shooting_photo_02.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html You can capture still images using the basic app for smartphone.

  1. Turn on the power of the camera.

  2. Press the mode button to select the still image capture mode.

    • Still image icon lights.
  3. Connect the camera to a smartphone via a wireless LAN or Bluetooth®.
  4. Start the basic app for smartphone.
  5. Tap to capture an image.
    • Tapping EV at the bottom of the screen displays the slider for correcting the exposure. If you check a still image and feel that it is too bright or too dark, adjust the brightness and capture the image to obtain the desired brightness. Moving the slider to the right brightens the image. Moving the slider to the left darkens the image.
    • In the still image capture mode, you can make settings such as shutter speed, ISO sensitivity, white balance, shooting method, image size, live view, and post-view on/off to suit the purpose of your shooting.

Caution

  • If the shutter speed is set slower than 1/8 seconds in the manual mode, a sound is heard both at the start and end of shooting. If images are captured with the noise reduction set in the auto mode, a sound is heard both at the start and end of shooting. At this time, images are not saved if the power is turned off before shooting is complete.
  • When shooting in the auto mode with the noise reduction or HDR rendering set, fix the camera in place using a tripod to prevent the camera from moving.

Note

  • If an image is captured while the camera is connected to a smartphone with the GPS function enabled, position information is recorded for the image.
  • If [Transfer method] is set to [Move], still images are deleted from the internal memory of the camera after they are transferred to the smartphone.
  • Still images can also be captured using the shutter button of the camera. However, these still images are not transferred to the smartphone.
  • If the shutter speed is set slower than 1/8 seconds in the manual mode, all lamps turn off. If images are captured with the noise reduction set in the auto mode, all lamps may turn off.
]]> Shooting Still Images Using Only the Camera with the Self-timer Function https://support.theta360.com/en/manual/v/content/shooting-photo/shooting_photo_03.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html This section explains the shooting method using the self-timer function.

  1. While pressing the wireless button, press the power button on the camera to turn the power on.

    • The camera status lamp lights green.
  2. Place the camera.
  3. Press the shutter button to start the self-timer.
    • Countdown starts and shooting is performed 5 seconds later.
    • During countdown, the camera status lamp flashes green and the countdown sound is heard.
      (When the remaining time is less than 2 seconds, flashing becomes quicker. When flashing becomes quicker, the countdown sound interval also becomes shorter.)

Note

Caution

  • An accurate date and time are not recorded if images are captured when the camera has never been connected to a smartphone.
  • Orientation information may not be recorded correctly if the camera is tilted when shooting.
  • The capture mode is limited to the still image capture mode. (The self-timer cannot be used for the video mode.)

Camera Status Lamp

Some lighting statuses of the camera status lamp show that it is not possible to shoot. Refer to the following and check the status of the camera.

Lit in blue:
The camera can be used.
Flashing in blue:
The camera is starting up.
Flashing in red:
An error has occurred in the camera.
Lit in green:
The self-timer can be used for shooting.
* Except when an image is captured with HDR rendering set in the auto mode.
Flashing in green:
The self-timer is on.
Unlit:
Shooting is not possible as the camera is in the sleep mode, no more images can be captured, or no more recordable time remains. The lamp is also unlit during shooting.

Note

  • The camera automatically enters the sleep mode if no operations are performed for a set period of time (default setting: 3 minutes). Shooting is not possible in the sleep mode. Press the power button to enable shooting, and then press the shutter button to capture a still image.
  • Orientation information may not be recorded correctly if a magnet or other magnetic item is placed near the camera.
  • If no more images can be captured, delete images from the camera.
]]> Shooting Still Images Using Only the Camera https://support.theta360.com/en/manual/v/content/shooting-photo/shooting_photo_01.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html This section explains basic methods for shooting still images.

  1. Turn on the power of the camera.

  2. Press the mode button to select the still image capture mode.

    • Still image icon lights.
  3. Position the camera.
    • Position the camera as upright as possible.
  4. Press the shutter button.

    • The captured still image is saved in the internal memory of the camera.

Note

Caution

  • An accurate date and time are not recorded if images are captured when the camera has never been connected to a smartphone.
  • Orientation information may not be recorded correctly if the camera is tilted when shooting.

Camera Status Lamp

Some lighting statuses of the camera status lamp show that it is not possible to shoot. Refer to the following and check the status of the camera.

Lit in blue:
The camera can be used.
Flashing in blue:
The camera is starting up.
Flashing in red:
An error has occurred in the camera.
Lit in green:
The self-timer can be used for shooting.
* Except when an image is captured with HDR rendering set in the auto mode.
Flashing in green:
The self-timer is on.
Unlit:
Shooting is not possible as the camera is in the sleep mode, no more images can be captured, or no more recordable time remains. The lamp is also unlit during shooting.

Note

  • The camera automatically enters the sleep mode if no operations are performed for a set period of time (default setting: 3 minutes). Shooting is not possible in the sleep mode. Press the power button to enable shooting, and then press the shutter button to capture a still image.
  • Orientation information may not be recorded correctly if a magnet or other magnetic item is placed near the camera.
  • If no more images can be captured, delete images from the camera.
]]> Installing the Plug-in https://support.theta360.com/en/manual/v/content/plugin/plugin_00.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html You can install plug-ins in the camera.

The basic app for computer is required to install plug-ins. Download the app from the following site.
https://support.theta360.com/en/download/

  1. Connect the camera to the computer using the provided USB cable.
  2. On the Plug-in Store website, click the “Install” button for the plug-in to install.
    • The basic app for computer is started.
  3. Follow the instructions on the screen to install the plug-in.
]]> Uninstalling the Plug-in https://support.theta360.com/en/manual/v/content/plugin/plugin_03.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html
  • Start the basic app for computer.
  • Select [File] → [Plug-in management] in the menu.
  • Select the plug-in to uninstall from the plug-in list.
  • Select [Done].

    • Caution

    • The pre-installed plug-ins “USB Data Transfer” (firmware version 2.10.1 or later) and “Remote Play” cannot be uninstalled.
    ]]>         Changing the Plug-in https://support.theta360.com/en/manual/v/content/plugin/plugin_02.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html You can use the camera in a special mode using the plug-in installed in the camera.

    Changing the Plug-in Using the Basic App for Smartphone

    1. Turn on the power of the camera.

    2. Connect the camera to a smartphone via a wireless LAN.
    3. Start the basic app for smartphone, and then tap [Settings].
      • The [Settings] screen is displayed.
    4. Tap [Camera settings].
      • The [Camera settings] screen is displayed.
    5. Tap [Plug-in], and then tap the plug-in to use.

    Note

    • If [Start plug-in] is tapped, the plug-in is run.
    • If [Starting plug-in] is tapped on the [Camera settings] screen after the plug-in is run, the plug-in setting screen is displayed (only when the setting screen is available for the plug-in).

    Changing the Plug-in Using the Basic App for Computer

    1. Start the basic app for computer.
    2. Select [File] → [Plug-in management] in the menu.
    3. Select the plug-in to run from the plug-in list.
    4. Select [Done].

    Note

    • To run or terminate the plug-in, press and hold the mode button.
    ]]>         Connecting a Wireless Display Adapter to a TV https://support.theta360.com/en/manual/v/content/tv/tv_01.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html You can view images taken with the camera on a TV by connecting a wireless display adapter which is compatible with the camera to a TV.

    1. Set the wireless display adapter to a connection standby state.
    2. Turn on the power of the camera.

    3. Connect the camera to a smartphone via a wireless LAN.
    4. Start the basic app for smartphone, and then tap [Settings].
      • The [Settings] screen is displayed.
    5. Tap [Camera settings].
      • The [Camera settings] screen is displayed.
    6. Tap [Plug-in], and then tap [Remote Playback].
    7. Press and hold the mode button.

    Note

    • For the products with which proper operation has been confirmed, see the RICOH THETA official website.
    • For details on the wireless display adapter and how to connect it to a TV, see the manual of the adapter used.
    ]]>         Viewing Captured Still Images and Videos https://support.theta360.com/en/manual/v/content/tv/tv_03.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html You can move on the screen by moving the camera.
    Move onto the image to view in the image list, and then press the shutter button.

    • Image list

    : Refreshes the screen display.

    : Displays the license information.

    Viewer

    You can display a desired area of a spherical image taken with the camera, and zoom in or out to check details in the image.
    To change the display area, move the camera while pressing the shutter button.

    Press the shutter button when an image is displayed in the Viewer to display the buttons and perform various operations.

    • During still image display

    : Returns to the image list.

    : Zooms in on the image.

    : Zooms out on the image.

    • During video playback

    : Returns to the image list.

    : Repeats playback from the beginning.

    /: Plays back/pauses the video.

    : Zooms in on the video.

    : Zooms out on the video.

    ]]>         Connecting the Adapter to the Camera https://support.theta360.com/en/manual/v/content/tv/tv_02.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html The camera can be connected to a wireless display adapter via a wireless LAN. For how to connect the camera to a wireless display adapter, see the manual of the adapter.

    ]]>         Viewing Live Video on a Computer https://support.theta360.com/en/manual/v/content/streaming/streaming_02.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html You can display video live on a computer by switching to the live streaming mode.

    1. Connect the camera to the computer using the provided USB cable.

    2. Press the mode button to select the live streaming mode.

      • Video icon and LIVE icon light.
    3. Start an app that can play back live camera images. (“Media Player Classic – Home Cinema” (MPC-HC) is used as an example in the following descriptions.)
    4. Select [View] → [Options] in the “MPC-HC” menu.
    5. Select [Capture] in [Playback] on the [Options] screen, and then select [THETA V] in [Video].
    6. Select [External Filters] on the [Options] screen, and then click [Add Filter].
      • The [Select Filter] dialog box is displayed.
    7. Select [Enhanced Video Renderer] (EVR), and then click [OK].
      • The display returns to the [Options] screen.
    8. Select [Prefer] on the right side of the screen, and then click [OK].
      • The display returns to the playback screen.
    9. Select [File] → [Open Device] in the “MPC-HC” menu.
      • The live video is displayed on the computer.
      • The shutter button is not used because the video is continually output.

    Caution

    • Howling may occur if the computer speakers are used. If howling occurs, turn the computer speakers off.
    • The following operations are not available with the basic app for smartphone in the live streaming mode.
      • Shooting still images and videos
      • Viewing images in the camera
      • Transferring images from the camera
      • Deleting images from the camera

    Note

    • When the camera is connected using a USB cable, you can display live images while powering the camera. However, if the supplied power is low, a battery drain occurs, and the camera power may turn off.
    • Connect the camera to a charging downstream port (USB port compliant with USB BC standard) to supply power effectively.
    ]]>         Transferring Captured Still Images and Videos to a USB Storage Device https://support.theta360.com/en/manual/v/content/usb/usb_01.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html You can copy or move captured still images and videos to a USB storage device by connecting it to the camera with a USB cable.

    A USB storage device and USB OTG cable (Micro-USB male connector and USB Type-A female connector) compatible with the camera are required.

    1. Turn on the power of the camera.

    2. Connect the camera to a smartphone via a wireless LAN.
    3. Start the basic app for smartphone, and then tap [Settings].
      • The [Settings] screen is displayed.
    4. Tap [Camera settings].
      • The [Camera settings] screen is displayed.
    5. Tap [Plug-in], and then tap [USB data transfer].
    6. Connect a USB storage device to the camera using a USB OTG cable.
    7. Press and hold the mode button.
      • The plug-in installed in the camera runs and the camera status lamp lights white.
    8. Press and hold the shutter button of the camera.
      • Captured still images and videos are copied to the USB storage device. When the still images and videos are moved, they are deleted from the camera.
      • When the transfer is completed, the camera enters the shooting mode.

    Note

    • If [Start plug-in] is tapped on the screen of the basic app for smartphone, the browser opens. You can make various settings on this browser.
      • On the [THETA] and [STORAGE] folder display screens, you can copy, move, and delete still images and videos.
      • You can format the USB storage device.
      • When [×] in the upper left-hand corner of the browser is tapped, the display returns to [Device images] of the basic app for smartphone.
    • For the products with which proper operation has been confirmed, see the RICOH THETA official website.
    • Do not disconnect the cable or device connected to the camera during the transfer.
    • When the connected USB storage device has been formatted with the FAT32 file system, you can save files with a size of less than 4 GB.
    • When the connected USB storage device has been formatted with the ext4 file system, you can also save files with a size of 4 GB or more. The dedicated software supporting the ext4 file system must be installed on the computer.
      Proper operation has been confirmed with the following software:

      • extFS for Mac by Paragon Software
      • Linux File Systems for Windows by Paragon Software
    ]]>         Viewing Captured Still Images and Videos https://support.theta360.com/en/manual/v/content/phone/phone_01.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html The basic app for smartphone can be used to view images saved in the camera or transferred to a smartphone.

    1. Turn on the power of the camera.

    2. Connect the camera to a smartphone via a wireless LAN.
    3. Start the basic app for smartphone.
      • The shooting screen is displayed.
    4. Tap [×] in the upper left-hand corner of the screen.
      • Transferred images are displayed in [Device images].
    5. Select where images are saved.
      • [Device images]
        • A list of images transferred from the camera to the smartphone is displayed.
        • Images can be displayed in either timeline or thumbnail format.
        • Images can be viewed even when the smartphone is not connected to the camera.
      • [Cam images]
        • A list of images saved in the internal memory of the camera is displayed.
        • The display can be toggled between [Not transferred], [Transferred], and [All].
    6. Tap the image to be viewed.
      • The selected image is displayed in the Viewer.

    Caution

    • It takes a long time to transfer long videos, and the battery may run down during the transfer.
    • When the video size is 3840 × 1920, the video may not be played back depending on the connected smartphone.

    Note

    • When an image is selected in [Cam images] and displayed in the Viewer, the selected image is transferred from the internal memory of the camera and saved to the smartphone. Videos can be resized to 1920 × 960 before transfer.
    • Images in the camera cannot be displayed while shooting video.

    Viewer

    You can display a desired area of a spherical image taken with the camera, and zoom in or out to check details in the image.
    The screens of “RICOH THETA for iPhone” are used as examples in the following descriptions.

    • Zooming in or out: Pinch out, pinch in

    • Changing the displayed area: Swipe or flick

    Tap the screen when an image is displayed in the Viewer to display the buttons and perform various operations.

    • When [Cam images] is selected

    : Returns to the image list.

    : Posts the image to a social networking service.

    • When [Device images] is selected

    : Returns to the image list.

    : Posts the image to a social networking service.

    : Displays the previous image.

    : Displays the next image.

    : Deletes the image.

    : Changes the display format.

    : Edits the image using the basic app, such as adding a blurred effect to a still image or extracting a part of a video.

    • During video playback

    : Returns to the screen before playback.

    : Returns the display area to the default state.

    : Repeats playback from the beginning.

    /: Plays back/pauses the video.

    : Changes the display format.

    ]]>         Blurring Still Images (iOS App Only) https://support.theta360.com/en/manual/v/content/phone/phone_04.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html You can blur part of a still image transferred from the camera to the basic app for smartphone.
    * Blurring is only available on the iOS app.

    1. Start the basic app for smartphone.
      • The shooting screen is displayed.
    2. Tap [×] in the upper left-hand corner of the screen.
      • A timeline of transferred images is displayed in [Device images].
    3. Select [Device images].
    4. Tap the still image you want to edit.
      • The selected still image is displayed in the Viewer.
    5. Tap the image to display the navigation bar.
    6. Tap , and then tap [Blur].
      • The editing screen is displayed.
    7. Trace the area to be blurred with your fingers.
      • The traced area is blurred.
      • The displayed area can be moved by flicking or swiping the zoom out display section of the spherical image.
      To make the blurred area smaller (remove some of the blurring)
      Tap [Cancel]. When the blurred area turns green, trace the area to remove the blurring from with your fingers.
    8. Tap [Save new].
      • The edited still image is saved as a new file.

    Note

    ]]>         Sharing Still Images and Videos https://support.theta360.com/en/manual/v/content/phone/phone_05.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html Captured images can be directly uploaded to a social networking service from the basic app.

    1. Turn on the power of the camera.

    2. Connect the camera to a smartphone via a wireless LAN.
    3. Start the basic app for smartphone.
      • The shooting screen is displayed.
    4. Tap [×] in the upper left-hand corner of the screen.
      • A timeline of transferred images is displayed in [Device images].
    5. Select where images are saved.
      • [Device images]: Images transferred from the camera to the smartphone can be shared.
      • [Cam images]: Images saved in the internal memory of the camera can be shared.

    6. Tap the image to be shared.
      • The selected image is displayed in the Viewer.
    7. Tap the image to display the buttons, and then tap .*
      • The sharing screen is displayed.

      * Select [Share with this orientation] to change the area initially displayed as a thumbnail when an image is uploaded to “theta360.com” and the area that is first displayed when an image is viewed.

    8. Enter a comment.
    9. Select the social networking service to post the image to.
    10. Tap [Done].

    Caution

    • A 3G or LTE line is used for sharing in Step 9 even if the camera is connected to a smartphone via a wireless LAN. Therefore, this operation needs to be performed in a place where this communication is possible. If sharing images via a wireless LAN, change the wireless LAN connection to an access point.
    • When using “RICOH THETA for Android” to connect the smartphone to the camera via a wireless LAN, you may need to switch network connections to post images. Therefore, when you want to use the camera by connecting it to the smartphone after posting images, reconnect them.
    • When an image is posted to a social networking service, it is compressed by the social networking service and may become grainy. Check the specifications of the social networking service for details.

    Note

    • Images are uploaded to the dedicated site “theta360.com”, and a link to the uploaded images is posted to the social networking service.
    • For still images, Photo Sphere XMP meta data is saved when the image is captured. Still images that have Photo Sphere XMP meta data added can be shared and viewed as spherical images on various Google services (Gallery, Google Maps, View, Google+, Photos, etc.).
    ]]>         Deleting Captured Still Images and Videos https://support.theta360.com/en/manual/v/content/phone/phone_02.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html Images that have been saved in the camera or transferred to a smartphone can be deleted.

    1. Turn on the power of the camera.

    2. Connect the camera to a smartphone via a wireless LAN.
    3. Start the basic app for smartphone.
      • The shooting screen is displayed.
    4. Tap [×] in the upper left-hand corner of the screen.
      • A timeline of transferred images is displayed in [Device images].
    5. Select where images are saved.
      • [Device images]
        • Images transferred to the smartphone can be deleted.
        • Images can be deleted even when the smartphone is not connected to the camera.
      • [Cam images]
        • Images saved in the internal memory of the camera can be deleted.
    6. Tap .
      • The selection screen appears.
    7. Select the images to be deleted.
      • Multiple images can be selected. A check mark appears for selected images.
      • Tap (Select All button) to select all images. Tap (Cancel button) to cancel all selections.
    8. Tap [Delete].
      • A confirmation screen is displayed. Tap [Delete] to start deleting.

    Note

    • Images in the camera cannot be deleted while shooting video or in the live streaming mode.
    ]]>         Transferring Captured Still Images and Videos to a Smartphone https://support.theta360.com/en/manual/v/content/phone/phone_03.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html Images saved in the internal memory, such as images taken using only the camera, can be transferred to a smartphone.

    1. Turn on the power of the camera.

    2. Connect the camera to a smartphone via a wireless LAN.
    3. Start the basic app for smartphone.
      • The shooting screen is displayed.
    4. Tap [×] in the upper left-hand corner of the screen.
      • A timeline of transferred images is displayed in [Device images].
    5. Select [Cam images].
      • A list of images saved in the internal memory of the camera is displayed.
    6. Tap .
      • The selection screen appears.
    7. Select the images to be transferred.
      • Multiple images can be selected. A check mark appears for selected images.
      • Tap (Select All button) to select all images. Tap (Cancel button) to cancel all selections.
    8. Tap [Transfer].
      • The transfer starts and the progress is displayed on the screen.
      • To cancel the transfer, tap [×], and then tap [Cancel transfer].

    Caution

    • It takes a long time to transfer long videos, and the battery may run down during the transfer.

    Note

    • [Transfer method] in [Settings] can be used to select whether to keep images in the camera when they are transferred.
    • Images in the camera cannot be transferred while shooting video or in the live streaming mode.
    ]]>         Recording a 360 Degrees Spatial Audio https://support.theta360.com/en/manual/v/content/shooting-movie/shooting_movie_03.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html You can record a 360 degrees spatial audio using the built-in microphone of the camera or an external microphone.

    Using the Built-in Microphone

    A 360 degrees spatial audio can be recorded with four microphones incorporated in the camera.

    Using an External Microphone

    A 360 degrees spatial audio with a higher quality can be recorded with the 3D microphone TA-1 (sold separately).
    Connect the 3D microphone to the microphone terminal and tripod mount hole at the bottom of the camera.

    Caution

    • If the camera is used near a broadcast tower or high-tension wire, a noise may occur.
    • While shooting videos, camera operation sounds may be recorded.
    • If the holes for the built-in microphone are blocked, 360 degrees spatial audios may not be recorded properly.
    • If the camera is touched during recording, a noise is recorded.
    • The built-in microphone is disabled when the 3D microphone is connected.
    • Use a tripod for shooting and recording when the 3D microphone is connected.
    • For details on the 3D microphone, see the user guide provided with the microphone.
    ]]>         Shooting Videos while Connected to a Smartphone https://support.theta360.com/en/manual/v/content/shooting-movie/shooting_movie_02.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html You can capture videos using the basic app for smartphone.

    1. Turn on the power of the camera.

    2. Press the mode button to select the video mode.

      • Video icon lights.
    3. Connect the camera to a smartphone via a wireless LAN or Bluetooth®.
    4. Start the basic app for smartphone.
    5. Tap to capture a video.
      • Tap to stop shooting. (Shooting can also be stopped by pressing the shutter button of the camera.)
      • Tap in the upper right-hand corner of the screen to change the video size, etc.

    Note

    • If a video is captured while the camera is connected to a smartphone with the GPS function enabled, position information is recorded for the video.
    • Videos can also be captured using the shutter button of the camera.
    • The following operations are not available with the basic app for smartphone while capturing videos.
      • Viewing images in the camera
      • Transferring images from the camera
      • Deleting images from the camera
    • Meta data that is compatible with the 360 degree video format is added when a video is transferred to a smartphone. Videos that have meta data added can be shared and viewed as spherical images on YouTube.

    Caution

    • The video with a length of 5 minutes or more may not be transferred to a smartphone.
    • The video may not be played back on a smartphone or computer depending on the video settings.
    • The camera may become hot when shooting videos for a long period of time. In this case, the camera may stop operating to prevent damage from high temperatures.
    ]]>         Shooting Videos Using Only the Camera https://support.theta360.com/en/manual/v/content/shooting-movie/shooting_movie_01.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html This section explains basic methods for shooting videos.

    1. Turn on the power of the camera.

    2. Press the mode button to select the video mode.

      • Video icon lights.
    3. Position the camera.
      • Position the camera as upright as possible.
    4. Press the shutter button.
      • Press it again to stop shooting.
      • The video recording lamp on the camera flashes while capturing a video.

      • The captured video is saved in the internal memory of the camera.

    Note

    Caution

    • An accurate date and time are not recorded if images are captured when the camera has never been connected to a smartphone.
    • Orientation information may not be recorded correctly if the camera is tilted when shooting.
    • If you press and hold the power button and wireless button simultaneously to forcibly turn off the power of the camera while recording a video, the internal memory may become damaged and may no longer be able to save data.
    • The video with a length of 5 minutes or more may not be transferred to a smartphone.
    • The video may not be played back on a smartphone or computer depending on the video settings.
    • The camera may become hot when shooting videos for a long period of time. In this case, the camera may stop operating to prevent damage from high temperatures.

    Camera Status Lamp

    Some lighting statuses of the camera status lamp show that it is not possible to shoot. Refer to the following and check the status of the camera.

    Lit in blue:
    The camera can be used.
    Flashing in blue:
    The camera is starting up.
    Flashing in red:
    An error has occurred in the camera.
    Unlit:
    Shooting is not possible as the camera is in the sleep mode, no more images can be captured, or no more recordable time remains. The lamp is also unlit during shooting.

    Note

    • The camera automatically enters the sleep mode if no operations are performed for a set period of time (default setting: 3 minutes). Shooting is not possible in the sleep mode. Press the power button to enable shooting, and then press the shutter button to capture a video.
    • Orientation information may not be recorded correctly if a magnet or other magnetic item is placed near the camera.
    • If no more time remains for shooting, delete images from the camera.
    ]]>         Specifications https://support.theta360.com/en/manual/v/content/add_info/add_info_01.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html
    Image sensor:
    1/2.3 CMOS (Effective pixels: Approx. 12.0 megapixels) × 2
    File size (still images):
    5376 × 2688
    File size and frame rate (videos):
    3840 × 1920, 29.97 fps
    1920 × 960, 29.97 fps
    File size and frame rate (live streaming):
    3840 × 1920, 29.97 fps
    1920 × 960, 29.97 fps
    Lens:
    Aperture: F2.0
    Lens construction: 7 elements in 6 groups × 2
    Capture mode:
    Still image: Auto, Shutter priority, ISO priority, Manual (*1)
    Video: Auto
    Live streaming: Auto
    Shooting distance:
    Approx. 10 cm to ∞ (from front of lens)
    Exposure control mode:
    Program AE, Shutter speed priority AE, ISO sensitivity priority AE, Manual exposure (*1)
    Exposure compensation:
    Manual compensation (-2.0 to +2.0 EV, 1/3 EV steps) (*1)
    ISO sensitivity (standard output sensitivity):
    Still image: ISO 64 to 1600 (Auto), ISO 64 to 3200 (ISO priority, Manual) (*1)
    Video: ISO 64 to 6400
    Live streaming: ISO 64 to 6400
    White balance mode:
    Still image: Auto, Outdoor, Shade, Cloudy, Incandescent light 1, Incandescent light 2, Daylight color fluorescent light, Natural white fluorescent light, White fluorescent light, Light bulb color fluorescent light, Color temperature settings (2500 to 10000 K) (*1)
    Video: Auto
    Live streaming: Auto
    Shutter speed:
    Still image: 1/25000 to 1/8 seconds (Auto, Shutter priority), 1/25000 to 60 seconds (Manual) (*1)
    Video: 1/25000 to 1/30 seconds
    Live streaming: 1/25000 to 1/30 seconds
    Recording medium:
    Internal memory: Approx. 19 GB
    Number of images that can be recorded and recording time (*2):
    Still image: Approx. 4800 images
    Video (time per recording): Max. 5 or 25 minutes (*1) (*3)
    Video (total recording time): Approx. 40 minutes (4K, H.264), approx. 130 minutes (2K, H.264)
    Power source:
    Lithium ion battery (built-in battery) (*4)
    Battery life:
    Still image: Approx. 300 images (*5)
    Video: Approx. 80 minutes (*5)
    Image file format:
    Still image: JPEG (Exif Ver. 2.3)
    Video: MP4 (Video: MPEG-4 AVC/H.264, Audio: AAC-LC (mono) + Linear PCM (4ch spatial audio))
    Live streaming: (Video: H.264, Audio: AAC-LC (mono))
    Other:
    Self-timer shooting, Interval shooting, Multi bracket shooting
    External interface:
    Micro-USB terminal: USB 2.0
    Microphone terminal (*6)
    Bluetooth® accessory:
    Compatible with the Remote Control TR-1
    Remote release:
    CA-3 (optional)
    Dimensions:
    45.2 mm (W) × 130.6 mm (H) × 22.9 mm (17.9 mm (*7)) (D)
    Weight:
    Approx. 121 g
    Operating temperature range:
    0 to 40°C (0 to 104°F)
    Operating humidity range:
    90% or less
    Storage temperature range:
    -20 to 60°C (-4 to 140°F)

    (*1)
    A smartphone is required to change modes or configure manual settings.

    (*2)
    The number of images and time are guides only. The actual number differs according to the shooting conditions.

    (*3)
    Recording stops automatically if the internal temperature increases.

    (*4)
    Charge the battery by connecting it to a computer using the provided USB cable.

    (*5)
    The number of images that can be taken is a guide based on RICOH’s measurement method. The actual number differs according to the usage conditions.

    (*6)
    Do not connect any device other than the 3D microphone TA-1 to the microphone terminal.

    (*7)
    Excluding lens section.

    ]]>         Trademarks https://support.theta360.com/en/manual/v/content/add_info/add_info_06.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html
  • Wi-Fi is a registered trademark of Wi-Fi Alliance.
  • Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States of America and other countries.
  • Mac, OS X, macOS, iPhone, and App Store are trademarks of Apple Inc., registered in the U.S. and other countries.
  • IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
  • Facebook, the Facebook logo, and “f” logo are the trademarks or registered trademarks of Facebook, Inc.
  • Twitter, the Twitter logo, Twitter “t” logo, and Twitter blue bird are the registered trademarks of Twitter, Inc. in the United States and other countries.
  • Tumblr and the Tumblr logo are the registered trademarks of Tumblr, Inc.
  • Google, Android, Google Play, YouTube, and YouTube logo are trademarks or registered trademarks of Google Inc.
  • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Ricoh Company, Ltd. is under license.
  • Instagram and the Camera logos are trademarks of Instagram, LLC in the United States and elsewhere.
  • All other trademarks are the property of their respective owners.
    • ]]>         Care and Storage https://support.theta360.com/en/manual/v/content/add_info/add_info_04.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html

    Care

    • Note that if fingerprints, dirt, etc. get onto the lens, image quality may deteriorate.
    • When dust or dirt does get on the lens, do not touch it directly with your fingers, and either use a blower (available in stores) to blow it off, or a soft cloth to gently dust it off.
    • Wipe the lens particularly carefully after use at the beach or around chemicals.
    • If the camera fails to work properly, consult the nearest service center.
    • Never disassemble the camera by yourself, as this is dangerous.
    • Do not get volatile substances, such as thinner, benzine, or pesticides on the camera. This may cause a change in quality, paint to peel, etc.
    • If the camera exterior becomes dirty, wipe it clean using a dry soft cloth such as a glasses wiping cloth, or wipe it using a thoroughly wrung out wet cloth. Do not use solvents, as doing so may cause the external surface of the camera to corrode.

    Use and Storage

    • Avoid using or storing the camera in the following kinds of places, as this may damage the camera.
      Places with high temperature, high humidity, or rapid changes in humidity or temperature
      Places with large amounts of sand or dust
      Places with significant vibration
      Places where it will be in contact with chemicals such as insect repellent or products made from rubber, vinyl, etc. for long periods of time
      Places where strong magnetism is emitted (next to monitors, transformers, magnets, etc.)
    • Store the camera in a dust-free camera bag, etc. to prevent dust or dirt from getting on the camera. Also, avoid carrying the camera without a case (in your pocket, etc.) to help to keep free from dust or fiber particles.

    Precautions Regarding Care of the Camera

    • Be sure to turn the power off.
    ]]>         Safety Precautions https://support.theta360.com/en/manual/v/content/add_info/add_info_05.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html Warning Symbols

    Various symbols are used throughout this user guide and on the product to prevent physical harm to you or other people and damage to property. The symbols and their meanings are explained below.

    　Danger

    • This symbol indicates matters that may lead to imminent risk of death or serious injury if ignored or incorrectly handled.

    　Warning

    • This symbol indicates matters that may lead to death or serious injury if ignored or incorrectly handled.

    　Caution

    • This symbol indicates matters that may lead to injury or physical damage if ignored or incorrectly handled.

    Sample Warnings

    • The  symbol alerts you to actions that must be performed.

    • The symbol alerts you to prohibited actions.
      The symbol may be combined with other symbols to indicate that a specific action is prohibited.
    • Examples
       Do not touch
       Do not disassemble

    Observe the following precautions to ensure safe use of the camera.

    　Danger

    • Do not attempt to disassemble, repair, or alter the camera yourself. The high-voltage circuitry in the camera poses significant electrical hazard.

    • Stop use immediately if you notice something unusual such as an abnormal smell, smoke, or overheating. Ask your nearest dealer or service center for repair.

    　Warning

    • Turn off the power immediately if any metallic object, water, liquid, or other foreign object gets into the camera. And contact the nearest service center. Do not continue using the camera if it has a failure or malfunction.

    • Keep the camera out of the reach of children. Young children cannot understand the information in Safety Precautions and Cautions on Use, which may cause an accident.

    • Do not touch the internal components of the camera if they become exposed as a result of being dropped or damaged. The high-voltage circuitry in the camera poses significant electrical hazard. Contact your nearest dealer or service center if it is damaged.

    • Do not use the camera near flammable gases, gasoline, benzine, thinner, or similar substances to avoid the risk of explosion, fire, or burns.
    • Do not use the camera in locations such as airplanes where usage is restricted or prohibited as this may lead to disasters or accidents.

    • Stop charging if the charging does not complete within the specified charging time.
    • Never put the battery in a microwave oven or high-pressure container.

    　Caution

    • Contact with fluid leaking from the battery in the camera can lead to burns. If you touch the fluid, rinse the area with water immediately. (Do not use soap.) And contact the nearest service center. Do not continue using the camera if it has a failure or malfunction.

    • Do not get the camera wet. In addition, do not operate it with wet hands. Both pose the risk of electric shock.
    • Do not use the camera wrapped in a cloth, etc. Doing so may cause a fire.
    • Do not allow the metal of the terminals to short circuit. Doing so may cause a fire.
    • Do not use the camera in wet places like kitchens where it will be exposed to oily smoke and humidity. Doing so may cause a fire or electric shock.
    ]]>         Separately Sold Products https://support.theta360.com/en/manual/v/content/add_info/add_info_02.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html

  • 3D Microphone (TA-1)

    The 3D microphone records sounds from all directions when it is connected to the microphone terminal and tripod mount hole of the camera.

  • Underwater Housing (TW-1)

    The underwater housing with waterproof performance down to a depth of 30 m.

  • Attachment for Strap (AT-1)

    Used to attach a strap to the camera.

  • Soft Case (TS-1)

    Slot-in type storage case that is both functional yet protective.

  • Hard Case (TH-2)

    A sturdy, rainproof case made of transparent polycarbonate.
    The hard case TH-1 can also be used.

  • Extension Adapter (TE-1)

    The adapter to avoid interference between a USB cable and a tripod when they are connected to the camera.

  • Cable Switch (CA-3)

    The shutter button on the cable switch can be used to take pictures in place of the shutter button on the camera.

    • ]]>         Cautions on Use https://support.theta360.com/en/manual/v/content/add_info/add_info_03.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html

    Camera

    • This product was manufactured for use in the country in which it was purchased. The warranty is only valid in the country in which the camera was purchased.
    • Should the product fail or malfunction while you are abroad, the manufacturer assumes no responsibility for servicing the product locally or bearing the expenditure incurred therefore.
    • Be sure not to drop or apply any sudden force to the camera.
    • While you are carrying the camera, be careful not to hit it against other objects. Take special care not to hit the lens.
    • In an environment where the temperature changes suddenly, condensation may occur in the camera, resulting in troubles such as fogging of the glass surface or malfunctions of the camera. If this occurs, place the camera in a bag to slow the temperature change as much as possible. Take it out of the bag after the temperature difference from the atmosphere has decreased to a fairly small amount. If condensation occurs, wait until the moisture has dried before using the camera.
    • Do not get the camera wet. Do not operate the camera with wet hands. This can result in malfunction or an electrical shock.
    • When taking photos of an important event (such as a wedding or overseas trip), take a test photo beforehand to check that the camera is working properly.
    • The camera may become hot when shooting for a long period of time. In this case, the camera may stop operating to prevent damage from high temperatures.

    Battery

    • A lithium ion battery is used in the camera.
    • Be sure to charge the battery before use, as it is not fully charged at the time of dispatch.
    • Due to the characteristics of the battery, use in cold areas will shorten the usage time even if the battery is sufficiently charged.
    • If storing for a long time, charge the battery for around 30 minutes once a year.
    • Store the battery in a cool place. A dry place with an ambient temperature of 15 to 25°C (59 to 77°F) is recommended. Avoid extremely hot or cold places.
    • Do not recharge immediately after charging is done.
    • Charge the battery in an area with an ambient temperature of 10 to 40°C (50 to 104°F). Charging in a hot area may cause the battery to deteriorate. Charging in a cold area may prevent sufficient charging.
    ]]>         Importing Still Images and Videos to a Computer https://support.theta360.com/en/manual/v/content/pc/pc_03.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html Images saved in the internal memory of the camera can be transferred to your computer.

    1. Connect the camera to the computer using the provided USB cable.

    2. Import images to the computer.
      • Windows
        Follow the instructions on the screen display. (Select [Open device to view files].)
      • Mac
        Use the “Photos” app or “Image Capture”.
    3. Remove the USB cable after the transfer is completed.

    Note

    • Images in the camera can be deleted from the computer.
    • Images cannot be transferred from the computer to the camera.
    • Image slant is not corrected for images imported from the camera. Image slant is automatically corrected when images are displayed using the basic app for computer.
    • The file transfer app needs to be installed to transfer images with a size of more than 4 GB to a Mac. (Details)

    Caution

    • Do not turn off the power or remove the USB cable while importing images.
    • Fully insert the USB cable when connecting it.
    ]]>         Installing the App for Computer https://support.theta360.com/en/manual/v/content/pc/pc_02.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html The basic app for computer needs to be installed to display images transferred from the camera on a computer.

    1. Access the following site and download the basic app for computer.
    2. Follow the instructions on the screen to install the basic app for computer.

    When transferring images with a size of more than 4 GB

    The file transfer app needs to be installed to transfer images with a size of more than 4 GB to a Mac.

    1. Access the following site and download the basic app for computer.
    2. Follow the instructions on the screen to install the app.

    Note

    • Log in using a user account with administrator privileges to install the apps.
    ]]>         Viewing Videos on a Computer https://support.theta360.com/en/manual/v/content/pc/pc_05.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html Using the basic app for computer allows you to convert videos taken on the camera and then scroll, zoom in, and zoom out while viewing spherical videos on the computer.

    1. Start the basic app for computer.
    2. Select [File] → [Open] in the menu.
    3. Select a video to view.
      • The selected video starts playing.
      • You can also open files by dragging and dropping them to the window of the basic app for computer.
      When the file before conversion is selected (the file name is “R***.MP4”)
      A video conversion dialog box is displayed. Select or enter the desired output directory (folder to which to save the converted video) and click [Start].
      • Multiple files can be converted at the same time by dragging and dropping files that have not been converted.
      • Conversion may take some time depending on conditions such as the length of the video.
      • The data file name after conversion is “R***_er.MP4”. This file name can be changed. Videos do not need to be converted again the next time they are viewed.
      • Meta data that is compatible with the 360 degree video format is added to the converted data. Videos that have meta data added can be shared and viewed as spherical images on YouTube.
      • The following operations are available on the playback/display screen:
        : Zooms in on the video.
        : Zooms out on the video.
        : Returns the display area to the default state.
        : Makes the video rotate automatically.
        : Switches to full screen display.
        Operations with mouse:
        Drag to scroll within the video.
        Use the mouse wheel to zoom in or out on the video.
        Operations with keyboard:
        Press the “Page Up” key to zoom in on the video.
        Press the “Page Down” key to zoom out on the video.
        Press the ←, ↑, ↓, and → keys to scroll the video.
      • A full screen display can be launched by selecting [Display] → [Full Screen]. Press the “Esc” key to close the full screen display.

    Caution

    • When the video size is 3840 × 1920, the video may not be played back or may be resized to 1920 × 960 depending on the connected computer.

    Closing the Video

    Select [File] → [Close] in the menu.

    ]]>         Viewing Still Images on a Computer https://support.theta360.com/en/manual/v/content/pc/pc_04.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html Using the basic app for computer allows you to scroll, zoom in, and zoom out while viewing spherical images on the computer.

    1. Start the basic app for computer.
    2. Select [File] → [Open] in the menu.
    3. Select a still image to view.
      • The selected still image is displayed.
      • You can also open files by dragging and dropping them to the window of the basic app for computer.
      • The following operations are available on the display screen:
        : Zooms in on the image.
        : Zooms out on the image.
        : Returns the display area to the default state.
        : Makes the image rotate automatically.
        : Switches to full screen display.
        Operations with mouse:
        Drag to scroll within the still image.
        Use the mouse wheel to zoom in or out on the image.
        Operations with keyboard:
        Press the “Page Up” key to zoom in on the image.
        Press the “Page Down” key to zoom out on the image.
        Press the ←, ↑, ↓, and → keys to scroll the image.
      • A full screen display can be launched by selecting [Display] → [Full Screen]. Press the “Esc” key to close the full screen display.

    Exporting Slant Corrected Still Images

    Select [File] → [Write with top/bottom correction] → [JPEG data with XMP] in the menu.

    Still images whose slant has been corrected are exported.

    Closing the Still Image

    Select [File] → [Close] in the menu.

    ]]>         Sharing Videos from a Computer https://support.theta360.com/en/manual/v/content/pc/pc_08.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html Videos displayed in the basic app for computer can be posted to a social networking service (SNS).

    1. Select [theta360.com] → [Login] in the menu.
    2. Select the account to use.
      • Read the Terms of Use, check the check box next to “Agree to Terms of Use”, and then click [Login with Facebook] or [Login with Twitter] to select the account you want to use.
    3. Enter your account name and password in the login screen and select [Log in].
      • When you are logged in successfully, the theta360.com menu item changes from [Login] to [Logout].
    4. Select [theta360.com] → [Post (share on social networking service)] in the menu.
    5. Move the slider to adjust the area to be shared and select [To next].
      • Files with a size of up to 5 MB can be shared. Videos may be compressed if their file size is large.
    6. Enter a comment and select [Post].

    Note

    • An account for each social networking service is required to share images.
    • Shared videos can be viewed from a smartphone on which the basic app for smartphone is installed by accessing the URL of the site where the video was posted.
    • When [Unlisted] is selected for shared videos, only people who have the upload location URL can view the videos.
    • Videos that have been converted to MP4 files can also be shared as an e-mail attachment.
    • In order to view MP4 files received as an e-mail attachment on a smartphone, save the MP4 file to the smartphone, select [Photos] or [Photo] on the basic app, and then play back the MP4 file.
    ]]>         Sharing Still Images from a Computer https://support.theta360.com/en/manual/v/content/pc/pc_07.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html Still images displayed in the basic app for computer can be posted to a social networking service (SNS).

    1. Select [theta360.com] → [Login] in the menu.
    2. Select the account to use.
      • Read the Terms of Use, check the check box next to “Agree to Terms of Use”, and then click [Login with Facebook] or [Login with Twitter] to select the account you want to use.
    3. Enter your account name and password in the login screen and select [Log in].
      • When you are logged in successfully, the theta360.com menu item changes from [Login] to [Logout].
    4. Select [theta360.com] → [Post (share on social networking service)] in the menu.
    5. Enter a comment and select [Post].

    Note

    • An account for each social networking service is required to share images.
    • When [Unlisted] is selected for shared images, only people who have the upload location URL can view the images.
    ]]>         Recommended Computer Environment https://support.theta360.com/en/manual/v/content/pc/pc_01.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html Images can be transferred from the camera to a computer using the provided USB cable. Transferred images can be viewed using the basic app for computer.

    See below for the recommended computer environment.

    https://support.theta360.com/en/enviroment/#PCAPP

    Caution

    • The USB function may not work properly if the OS of the computer has been upgraded.
    • Correct operation may not be possible if the OS environment is changed or with certain service pack releases.
    • Connections to USB ports that have been added using an expansion feature (PCI bus, etc.) are not supported.
    • Correct operation may not be possible when used in combination with a USB hub or other USB device.
    ]]>         Checking and Changing the Camera Settings https://support.theta360.com/en/manual/v/content/settings/settings_02.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html The status of the camera can be checked and various settings can be made with the basic app for smartphone.

    1. Tap [Settings] on the main screen.
      • The [Settings] screen is displayed.

    Setting Items

    The following setting items are displayed on the [Settings] screen.

    Connection:
    The connection status between the camera and the smartphone can be checked.
    Change Wi-Fi Password:
    The wireless LAN connection status can be checked and the password can be changed. Follow the procedure below to change the password.
    1. Enter a new password (8 or more characters) and tap [Change Password] at the bottom of the screen.
      • Single-byte alphanumeric characters and symbols can be used. (Spaces cannot be used.)
    2. When the password has been changed successfully, press the wireless button of the camera to turn the wireless LAN function off and back on.
      • The password is not changed until the wireless LAN function is turned off.
    3. Delete the old camera information used before the password change in the Wi-FiTM settings of the smartphone.
    4. Enter the new password in the Wi-FiTM settings of the smartphone and connect to the camera.

    Caution

    • The password can be changed only when the camera is connected to the smartphone.

    Note

    • Note that the previous password can no longer be used.
    • If you have forgotten the password, press and hold the wireless button to restore the default password. The power turns off automatically when the password is reset successfully.
    Cam Bluetooth settings:

    The on/off status of the camera Bluetooth function and GPS continuous transfer function can be checked, and the status can be switched on/off.

    Wi-Fi frequency band:
    The frequency band for wireless LANs can be changed.

    Note

      • When the frequency band is set to 5 GHz, use the camera indoors only.
      • The changed frequency band becomes effective when the wireless LAN function is turned on next time.
    Camera settings:
    The following camera settings can be checked and changed.

    Sleep time:
    The length of time before the camera enters the sleep mode can be set. (3 minutes, 5 minutes, 7 minutes, 10 minutes, OFF)
    Camera shutter volume*:
    The volume of the shutter sound can be set. (High, Medium, Low, OFF)
    Transfer method*:
    You can select whether to keep the images on the camera when transferring images from the camera to the smartphone. Select [Copy] to retain the images in the internal memory after transfer or select [Move] to delete the images from the internal memory after transfer.
    Plug-in*:
    The function enabled when the plug-in is run can be checked.
    Camera version*:
    The firmware version of the camera can be checked.
    Camera license*:
    The licenses used for the camera can be checked.
    My Settings:
    You can save shooting conditions set with a smartphone on the camera.
    Shooting conditions registered in My Settings will be enabled when you turn on the power of the camera when it is not connected to a smartphone.
    Share Settings:
    The account for each social networking service can be set.

    * Settings can only be checked and changed when the camera is connected to the smartphone.

    ]]>         Turning the Power Off Forcibly https://support.theta360.com/en/manual/v/content/settings/settings_04.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html You can forcibly turn off the camera when it is operating incorrectly or becomes inoperable.

    1. Press and hold the power button and wireless button when the power is on.

      • The power is forcibly turned off.
    ]]>         Checking and Changing the Shooting Conditions https://support.theta360.com/en/manual/v/content/settings/settings_01.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html Various settings such as the exposure mode and white balance can be set to suit the shooting conditions.
    * Only the video size can be changed when shooting videos.

    1. Turn on the power of the camera.

      • To change the shooting conditions for videos, press the mode button to switch to the video mode.
    2. Connect the camera to a smartphone via a wireless LAN or Bluetooth®.
    3. Start the basic app for smartphone.
    4. Tap the shooting mode button in the lower right-hand corner of the screen to change the mode.
      Auto:
      The shutter speed, ISO sensitivity, and white balance are adjusted automatically according to the shooting environment. The image correction method can also be selected from the noise reduction, DR compensation, and HDR rendering.
      The camera returns to this mode each time the power is turned on.
      Tv (Shutter priority):
      The shutter speed and white balance can be set.
      ISO (ISO priority):
      The ISO sensitivity and white balance can be set.
      M (Manual):
      The shutter speed, ISO sensitivity, and white balance can be set.
    5. Make settings for each item.
      • Move your finger over each setting value to select desired settings.
      • The section displayed in white is the current setting.
      • The setting ranges and options that can be selected for each item are as shown below.
        Shutter speed:
        1/8 to 1/25000 (Auto, Shutter priority), 60 to 1/25000 (Manual)
        ISO sensitivity:
        Still image: ISO 64 to 1600 (Auto), ISO 64 to 3200 (ISO priority, Manual)
        Video: ISO 64 to 6400
        Live streaming: ISO 64 to 6400
        White balance:
        Auto: Adjusted automatically.
        Outdoor: Adjusted for shooting outdoors (when sunny).
        Shade: Adjusted for shooting in the shade.
        Cloudy: Adjusted for shooting when cloudy.
        Incandescent light 1: Adjusted for shooting in incandescent light.
        Incandescent light 2: Adjusted for shooting in incandescent light.
        (More red remains than when using [Incandescent light 1].)
        Daylight color fluorescent light: Adjusted for shooting in daylight color fluorescent light.
        Natural white fluorescent light: Adjusted for shooting in natural white fluorescent light.
        White fluorescent light: Adjusted for shooting in white fluorescent light.
        Light bulb color fluorescent light: Adjusted for shooting in light bulb color fluorescent light.
        CT Settings: Adjusted with a specified color temperature value in the range 2500 to 10000 K.
        Tap in the upper right-hand corner of the screen during shooting still images to turn on [CT Settings].
      • Tapping EV displays the slider for correcting the exposure. Moving the slider to the right brightens the image. Moving the slider to the left darkens the image.

    Caution

    • If the shutter speed is set slower than 1/8 seconds in the manual mode, a sound is heard both at the start and end of shooting. If images are captured with the noise reduction set in the auto mode, a sound is heard both at the start and end of shooting. At this time, images are not saved if the power is turned off before shooting is complete.
    • When shooting in the auto mode with the noise reduction or HDR rendering set, fix the camera in place using a tripod to prevent the camera from moving.

    Note

    • Shooting condition settings are retained until the power is turned off or the settings are reconfigured.
    • For videos, only the auto mode can be selected for the shooting mode. Settings such as the shutter speed, ISO sensitivity, white balance, and exposure cannot be changed.

    Changing the Still Image Capture Mode Settings

    Tap in the upper right-hand corner of the screen during shooting still images to change various settings for the still image capture mode.

    Shooting method:
    The shooting method can be selected from [Normal shooting], [Interval shooting], [Self-timer shooting], and [Multi bracket shooting].
    Display after shooting:
    You can set whether or not to display the image after shooting.
    CT Settings:
    The color temperature setting can be turned on and off.

    Note

    • The settings can be made for the interval shooting to capture images at a fixed interval.
      Set [Shooting method] to [Interval shooting], and make the following settings.
      • Interval: 4 seconds to 60 minutes
      • Total shots: 2 to 200, Not specified
    • For the self-timer shooting, the countdown time can be selected from 10 seconds, 5 seconds, and 2 seconds.

    Changing the Video Mode Settings

    Tap in the upper right-hand corner of the screen during shooting videos to check and change various settings for the video mode.

    Microphone gain:
    The gain of the microphone can be set.
    [Normal] Used when the ambient sound volume is normal.
    [Low] Used when the ambient sound volume is high.
    Recordable time (1 time):
    The maximum recordable time per shooting can be set.
    Video size:
    The video size can be selected.
    Camera shutter volume:
    The volume of the shutter sound can be set.
    ]]>         Switching to the Developer Mode https://support.theta360.com/en/manual/v/content/develop/develop_01.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html Only the users who have registered in the partner program can use the developer mode.
    Refer to the following for details.

    The basic app for computer is required to use the developer mode. Download the app from the following site.
    https://support.theta360.com/en/download/

    1. Start the basic app for computer.
    2. Connect the camera to the computer using the provided USB cable.
    3. Select [Plug-in] → [Developer mode] in the menu.
      • Follow the instructions on the screen to make settings.
    ]]>         Updating the Camera Firmware Using a Computer https://support.theta360.com/en/manual/v/content/update/update_01.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html The camera firmware can be updated using the basic app for computer.

    The app is required to update the firmware. Download the app from the following site.
    https://support.theta360.com/en/download/

    1. Start the basic app for computer.
    2. Select [File] → [Firmware Update] in the menu.
    3. Follow the instructions on the screen to connect the camera to the computer using the provided USB cable.

    4. Select [To next].
    5. Check the current version and available version, and select [To next].
      • The firmware file is transferred to the camera, and the update process starts.
    6. When “Firmware Update: Done” is displayed, remove the USB cable from the computer.

    Caution

    • Fully insert the USB cable when connecting it.
    • Do not disconnect the camera from the computer during the firmware file transfer.
    • The camera power may not turn on if the firmware update fails. In this case, perform the firmware update again.

    Note

    • The capture mode lamps Still image icon and Video icon of the camera flash during the firmware update.
    ]]>         Updating the Camera Firmware Using a Smartphone https://support.theta360.com/en/manual/v/content/update/update_02.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html The camera firmware can be updated using the basic app for smartphone.

    The app is required to update the firmware. Download the app from the following site.
    https://support.theta360.com/en/download/

    1. Turn on the power of the camera.

    2. Connect the camera to a smartphone via a wireless LAN.
    3. Start the basic app for smartphone.
    4. Tap [Settings], and then tap [Update firmware].
      • The firmware version of the camera is checked.
    5. Tap [Check the latest version].
    6. Follow the instructions on the screen to change the wireless LAN settings of the smartphone and connect it to the Internet.
      • The latest available firmware version is checked.
    7. Tap [Start download].
      • The firmware file is downloaded to the smartphone.
    8. Tap [Transfer files to camera].
    9. Follow the instructions on the screen to change the wireless LAN settings of the smartphone and connect it to the camera.
    10. Tap [OK].
      • The firmware file is transferred from the smartphone to the camera. When the transfer is completed, the update process starts in the camera.
      • When the update process is completed, the camera restarts.

    Caution

    • When the internal storage space of the smartphone is insufficient, the downloading of the firmware file may be canceled. In this case, free up the space before performing the firmware update.
    • When the battery level of the camera is low, charge the battery before performing the firmware update.
    • Do not disconnect the wireless LAN connection between the camera and the smartphone during the firmware file transfer.
    • The camera power may not turn on if the firmware update fails. In this case, perform the firmware update again.

    Note

    • The capture mode lamps Still image icon and Video icon of the camera flash during the firmware update.
    ]]>         Checking the Package https://support.theta360.com/en/manual/v/content/prepare/prepare_01.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html When opening the package, check that the following items are included:

    • RICOH THETA V

    • USB cable

    • Soft case

    • Quick Start Guide

    • Important Message to Customers

    ]]>         Connecting to a Smartphone via Bluetooth® https://support.theta360.com/en/manual/v/content/prepare/prepare_07.html Thu, 07 Oct 2021 15:30:19 +0000 https://support.theta360stage.com/en/manual/content//.html When the camera is connected to a smartphone via the Bluetooth®, you can use the smartphone to capture images remotely and make function settings.

    1. Turn on the power of the camera.

    2. Turn on the Bluetooth® function of the smartphone.
    3. Connect the camera to a smartphone via a wireless LAN.
    4. Start the basic app for smartphone, and then tap [Settings].
      • The [Settings] screen is displayed.
    5. Tap [Cam Bluetooth settings].
      • The [Cam Bluetooth settings] screen is displayed.
    6. Tap [Turns on camera Bluetooth].

    Date and Time Settings

    The date and time of the camera are synchronized with the smartphone when the camera is connected to the smartphone and the basic app is started.

    ]]>