This section explains the names and functions of the buttons, lamps, etc. on the camera.
-
Microphone
-
Speaker
-
Lens
Caution
- Be careful when handling the lens section.
-
Camera Status Lamp
Displays the processing status of the camera.(Details)
- Lit in blue:
- Camera can be used.
*Except when captured with HDR rendering set as the auto mode. - Flashing in blue:
- Sleep mode (power saving).
- Lit in red:
- An error is occurring in the electromagnetic compass. (Videos can be taken)
- Flashing in red:
- An error has occurred in the camera.
- Lit in green:
- Shooting is possible with self-timer.
*Except when captured with HDR rendering set as the auto mode. - Flashing in green:
- Sleep mode (power saving) for shooting with self-timer.
- Unlit:
- Shooting is not possible as no more images can be taken/no more time remains. The lamp is also unlit during shooting.
-
Shutter button
Press to capture images.
-
Wireless lamp
Displays the wireless status.
- Lit in blue:
- Wi-FI function on (connected to Wi-Fi network)
- Flashing in blue:
- Wi-FI function on (not connected to Wi-Fi network)
- Unlit:
- Wi-Fi function off
-
Shooting Mode Lamp
The lamp that corresponds to the selected shooting mode lights. When a lamp is flashing, shooting is not possible because internal processing is in progress.The
and 
lamps flash during the firmware update. -
Video Recording Lamp
Flashes while a video is being shot.
-
Memory Warning Lamp
Indicates the remaining number of photos that can be taken with the display status.
- Unlit:
- Remaining number of photos that can be taken: More than 400 (Remaining memory: More than 25%)
- Lit:
- Remaining number of photos that can be taken: More than 160, less than 400 (Remaining memory: More than 10%, less than 25%)
- Flashing:
- Remaining number of photos that can be taken: Less than 160 (Remaining memory: Less than 10%)
Note
- The remaining number of images is a guide based on 5376 x 2688 size images.
-
Power lamp
Displays the power status.
-
Power button
Turns the power on/off.
-
Wireless button
Turns the wireless function on/off.
-
Shooting Mode Button
Switches between the still image capture mode and video capture mode. Press and hold this while turning the power on to switch to live streaming mode.
-
USB terminal
Connect to your computer using the provided USB cable.
Caution
- It may take time for the battery to charge or the battery may not charge at all when a USB cable other than the provided USB cable is used.
-
HDMI terminal
Used for live streaming mode.
-
Tripod mount hole
Caution
- When using the tripod, take care not to overtighten the screws.