TOP > Support > User Guide > THETA SC2
> Preparation > Connecting the Camera to the Remote Control TR-1

RICOH THETA SC2
User Guide

Connecting the Camera to the Remote Control TR-1

You can use the Bluetooth® function to connect the camera to the Remote Control TR-1 (sold separately).

  1. Turn on the power of the camera.

  2. Press and hold the self-timer button.

    • The camera enters the pairing state, and flashes on the OLED panel.
  3. Press and hold the shutter button on the Remote Control TR-1 to set it to the pairing state or connection standby state.
    • When the camera is connected to the Remote Control TR-1, becomes lit.

Disconnecting the Remote Control TR-1 from the Camera

  1. Press and hold the self-timer button.

    • turns off, and the Remote Control TR-1 is disconnected from the camera.

Resetting the Connection Information

When you want to connect another device to the camera or when the Remote Control TR-1 cannot be connected correctly, press and hold the wireless button and mode button simultaneously to reset the connection information.

Caution

  • If you reset the connection information, the wireless LAN password is also reset.