TOP > Support > User Guide > THETA V
> Preparation > Connecting the Camera to the Remote Control TR-1

RICOH THETA V
User Guide

Connecting the Camera to the Remote Control TR-1

You can use the Bluetooth® function to connect the camera to the Remote Control TR-1 (sold separately). Set the camera in advance so that the plug-in “REMOTE CONTROL” can be run.

  1. Turn on the power of the camera.

  2. Press and hold the mode button.

    • The camera status lamp flashes white.
  3. Press and hold the shutter button on the Remote Control TR-1 to set it to the pairing state or connection standby state.
    • When the camera is connected to the Remote Control TR-1, the camera status lamp lights white.

Note

  • After running the plug-in “REMOTE CONTROL”, the response speed of the wireless LAN slows down until the connection between the camera and the Remote Control TR-1 is established.

Disconnecting the Remote Control TR-1 from the Camera

  1. Press and hold the mode button.

    • The camera status lamp turns off, and the Remote Control TR-1 is disconnected from the camera.

Resetting the Connection Information

When you want to connect another device to the camera or when the Remote Control TR-1 cannot be connected correctly, press and hold the wireless button to reset the connection information.

Caution

  • If you reset the connection information, the wireless LAN password is also reset.